<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">Short:        ToccataOut driver for AudioLab 16
Author:       peteru@aristocrat.com.au
Uploader:     peteru aristocrat com au
Type:         mus/misc
Architecture: m68k-amigaos

Copyright ©1995-1996 Peter Urbanec

Supports the following:

DATA FORMATS
   8-bit unsigned mono     16-bit signed mono
   8-bit unsigned stereo   16-bit signed stereo

SAMPLE RATES
    5513,  6615,  8000,  9600, 11025, 16000, 18900,
   22050, 27429, 32000, 33075, 37800, 44100, 48000

AL16 COMMANDS
   AOD_CMD_INFO   AOD_CMD_START
   AOD_CMD_STOP   AOD_CMD_QUIT


External hardware is supported via two entities:
- a pre-driver (embedded in AL16)
- an external driver (this one)

For each board a specific pre-driver must exists.
For each pre-driver one or more external drivers may exist (but
only can be used during an AL16 session).

The pre-driver has limited knowledge of the board's hardware.
It doesn't know how to 'program' the board but it knows which
kind of 'data' the board can easily manage.
The pre-driver uses the AL16 DSP tools to map AL16 audio tracks
to board-friendly streams regarding samplepoint formats, number
of physical D/A converters, signal clocks,...

A ToccataOut pre-driver is available in AL16. It requires an
external ToccataOut driver to work with.


--- How to use this ---

- Set the AL16 tooltype OUT_DRIVER to ToccataOut.
- Put the ToccataOut driver into AL16's Drivers directory
  to allow AL16 to automatically run it
- Run AL16 and use any playback function you like.
- Quit AL16 to quit the driver.

The driver's executable name must be 'ToccataOut'.


Peter Urbanec                       peteru@aristocrat.com.au
Union Box 12
PO Box 173                        Tel: (Work) +61 2 693 0586
Kingsford NSW 2032                Fax: (Work) +61 2 313 4290
AUSTRALIA
</pre></body></html>