Subject: Info-Mac Digest V16 #332
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="Info-Mac-Digest"

--Info-Mac-Digest

Info-Mac Digest             Fri, 20 Aug 99       Volume 16 : Issue 332

Today's Topics:

      [*] TidBITS#493/16-Aug-99
      
      
      (A) Burning CD ROMs for PB
      (A) Low on Memory Notice;  Plenty of Memory
      (A) Networking troubles with Apple ColorLaserWriter 
      (A) Sherlock and Cmd-F doesn't work
      (A) twisted pair ethernet
      (A) USB to SCSI vrs SCSI to USB
      [A] How to convert records to CDs
      [Q] Can't communicate w/ Epson printer
      [Q] How to convert records to CDs
      [Q] How to correctly upload MP3 files to web
      [Q] midi files on the web
      [Q] Sherlock search of Info-Mac files?
      Apple Multiple Scan 17" Display
      Apple Studio Display 15 Color Calibration
      Apple's PCMCIA -> USB card drivers
      Boot problem
      DVD on Macintosh
      eudora-to-browser problem
      FindText: Searching in MS-Word documents
      Floppy Drive
      Floppy drive needed
      G3 and music CDs from vinyl or tapes 
      Help with Epson Stylus Color 900 needed
      HELP!  Apple AudioVision14 Monitor, 11" viewable
      Info-Mac Digest/ message/rfc822
      Need help changing default system icons
      Need help changing default system icons
      open a PM 6500?
      open a PM 6500?
      open a PM 6500?
      PowerWave to G3 card
      Printing on a Mac
      ssh or secure telnet for Macs?
      The Fate of Info-Mac
      USB to SCSI vrs SCSI to USB
      What Happened to Info-Mac Digest?!
      Whot Happened to Info-Mac Digest?!
      World Book CD

The Info-Mac Network is a volunteer organization that publishes the Info-Mac
Digest and operates the Info-Mac Archive, a large network of FTP sites
containing gigabytes of freely distributable Macintosh software.

Email Addresses and Instructions:
* To submit articles to the digest, email <mailto:digest@info-mac.org>.
* To subscribe, send email to <info-mac@starnine.com> with subscribe in
  the Subject line. <mailto:info-mac@starnine.com?subject=subscribe>
* To unsubscribe, send email to <info-mac@starnine.com> with unsubscribe in
  the Subject line. <mailto:info-mac@starnine.com?subject=unsubscribe>
* To change your address, unsubscribe from the old address, then subscribe
  from the new address. If that fails, try using the list maintenance
  form at <http://info-mac.starnine.com/> before contacting us.
* Please send administrative queries to <mailto:moderator@info-mac.org>.
* To submit files for the archive, email the binhexed file with a
  description to <mailto:macgifts@info-mac.org>. Submissions must be made
  by the author or with permission of the author. It may take up to a week
  to process; check mirror sites for the status of new uploads.

FTP and Web Addresses and Instructions:
* To submit files larger than 800K, email a description to 
  <mailto:archivist@info-mac.org> and then use an FTP client to upload the 
  binhexed file to info-mac.org, using the userid "macgifts" and the
  password "macgifts". Or, click <ftp://macgifts:macgifts@info-mac.org/>.
* A full list of Info-Mac mirror sites is available at the URL below:
  <http://hyperarchive.lcs.mit.edu/HyperArchive/Archive/help/mirror-list.txt>
* Search the archive at <http://hyperarchive.lcs.mit.edu/HyperArchive/>.

Info-Mac volunteers include Gordon Watts, Adam C. Engst, Demitri Muna,
Michael Bean, Liam Breck, Hugh Lewis, Tom Coradeschi, and Shawn Bunn.

The Info-Mac Digest is sponsored in part by StarNine Technologies, developers
of Internet server software for the Macintosh, including Web and email
publishing systems. <http://www.starnine.com/> We'd also like to thank AOL for
the main Info-Mac machine. <http://www.aol.com/>
----------------------------------------------------------------------

--Info-Mac-Digest
Content-Type: multipart/digest; boundary="----------------------------"
Content-Disposition: attachment; filename="Info-Mac Digest V16 #332"

------------------------------

Date: Mon, 16 Aug 1999 21:00:00 -0700
From: TidBITS Editors <editors@tidbits.com>
Subject: [*] TidBITS#493/16-Aug-99

TidBITS#493/16-Aug-99

Your friends turn to you to troubleshoot their Macs, but what if you aren't=
 nearby? Jeff Carlson looks at HouseCall, a utility for connecting to remote=
 Macs and using them as if they were on your desk. Also, we revisit=
 REALbasic and Internet grocery shopping, plus note the releases of=
 ShrinkWrap 3.5, a battery fix for some PowerBook G3 Series owners, and=
 MacHeadlines, which displays customizable new items from the Internet.=20

Topics:
    MailBITS/16-Aug-99
    REALbasic 2.0 Gets Real
    Patients Are a Virtue with HouseCall
    Internet Grocery Shopping Continues to Mature

<http://www.tidbits.com/tb-issues/TidBITS-493.html>
<ftp://ftp.tidbits.com/pub/tidbits/issues/1999/TidBITS#493_16-Aug-99.etx>

[Archived as /info-mac/per/tb/tidbits-493.etx; 30K]

------------------------------

Date: Fri, 13 Aug 1999 10:10:36 -0400 (EDT)
From: Norman Friedman <norm@helix.nih.gov>
Subject: 

X-Also known as Etta's husband and Moish, Ken, and Ira's father.
Date: Fri, 13 Aug 1999 10:09:00 -0400
To: info-mac@starnine.com
From: "Norman R. Friedman" <norm@helix.nih.gov>
Subject: Eudora addresses

Hi,
Somehow my list of addresses in the under the message heading, i.e, like
"new message to" or "forward to" has been doubled. My list of addresses in
the address book is correct, but when I try to send or forward a message I
need to pick the right name. I cannot figure how to get the inproper names
out of that list. I do not want to delete from address book since that
erases the correct addresses and I cannot delete from the message listings.
Any suggestions? Thanks in advance
norm@helix.nih.gov

------------------------------

Date: Mon, 16 Aug 1999 15:30:26 -0400 (EDT)
From: Norman Friedman <norm@helix.nih.gov>
Subject: 

X-Also known as Etta's husband and Moish, Ken, and Ira's father.
Date: Mon, 16 Aug 1999 15:30:27 -0400
To: info-mac@starnine.com
From: "Norman R. Friedman" <norm@helix.nih.gov>
Subject: Eudora  addresses

When updating my system, I found that my address book in Eudora was wiped
out. When I then re-entered all the addresses, lo and behold all the old
list was listed, along with the new addresses, not in the address book, but
under the Message list. Whenever I try to send a New Message or Forward, I
have to try to pick which is the active address. I cannot seem to find a
way to erase the names from the Message listing. Any help. Thanks in
advance.
norm@helix.nih.gov

------------------------------

Date: 18 Aug 99 06:23:46 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: (A) Burning CD ROMs for PB

Mark Vellek <mvellek@socket.net> asks:
>Okay, this one has me stumped. My mother just bought a CD ROM burner and
>is using Toast successfully. She is able to make a virtual backup of her
>beige G3 and read the CD ROM that she created on other machines, just
>not her PowerBook. Is there some type of setting that makes a difference
>in this? By the way, her PB is a 5500 series.

Mark:
An Apple compatible CD should be able to read anything provided it has the
correct drivers. Besides needing the Apple CD ROM driver, it may also need
support files for other formats of disk. The CD drivers usually install
with support for High Sierra, Audio, ISO 9660, Foreign File Access and
maybe UDF volume access. She may be missing some of these on the PB and
coincidentally have toasted the CD in that format.
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: 18 Aug 99 05:34:28 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: (A) Low on Memory Notice;  Plenty of Memory

"Jason Chafin" <jchafin@bigfoot.com> writes:

>I have a late '98 black PowerBook G3 (is that what they call Wallstreet?
>Not
>sure.) I have 96 MB of installed RAM and 1 meg of virtual memory.
Currently
>I'm running Internet Explorer, Outlook Express, Sherlock and Stickies. My
>"About This Macintosh" says that my largest unused block is 59.9 MB. So,
>why
>did I just get a message telling me that Memory is running low, please
>close
>windows? Also, These are programs I leave open frequently and sometimes
>my
>launcher blanks out or gives me the there's not enough memory, I have to
>close now message.  Seems like I have plenty of memory available.
>
>The only application that appears to be using all it's allotted ram is the
>Finder at 18.8 MB. The rest are at about half.

Jason:
That does sound odd. Could it be that you've got some really
large/demanding web page open in Explorer when you get the message but
you've closed it by the time you've checked the "about" box?
Sherlock's memory requirements are going to vary pretty widely too. I've
got alot of .src files in mine and have had to allocate 4 times the
suggested RAM to it so it wouldn't run out of memory. Try that.
The Finder is self adjusting. It'll take what it needs; that's why it looks
mostly full.
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: 18 Aug 99 05:44:35 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: (A) Networking troubles with Apple ColorLaserWriter 

David Brand <dbrand@utmem.edu> writes:
>For several years, we've enjoyed the use of a networked Apple
>ColorLaserWriter 12/600PS, which is hooked to our network via ethernet
>(using an Apple Ethernet Twisted Pair Transceiver).  In addition, the
>printer is also hooked to (an Evil) Windows NT 4.0 workstation via its
High
>Speed Parallel port.  Beginning a few months ago,  Mac users could only
>send one print job to the printer sucessfully before loosing contact with
>it.  A printer restart would redisplay the printer on our network again
for
>one more print job.  The apple printer utility shows all settings as
>default (the way they have always been) except for the memory upgrade. 
>The
>network settings toggle switch on the back is correct.  The NT machine
>seems to print just fine, but somehow "takes over" the networking ability
>of the printer.  If we unplug the NT from the printer, networking works
>fine, but as soon as it is plugged back in, we loose sight of the printer
>*after* the first Mac Print job.  Unfortunately, simply leaving the NT
>unplugged is not an option, as it gets heavy use as a dumb terminal hooked
>up to a very expensive phosphor imaging system.  I do not know enough
>about
>the nuances of NT printing to know what has happened or how to go about
>correcting the problem.
>Anyone else encounter any problems like this, or have any thoughts or
>solutions?  Any help would be greatly appreciated.

David:
We've had some luck using HP JetDirect boxes. They emulate a windows
spooler so the PeeCees can see and print to the printer as if it were
captured by a spooler but it also allows Macs to print to it. It connects
10baseT to the parallel port on the printer bypassing the AUII or 10baseT
on the printer.
For the most part this has worked well for us on a number of LW 16/600's
but we've had a couple failures that seemed to come from faulty JetDirect
boxes. They'd allow PeeCees to print but mess up the Mac printing. It must
have been a bad ROM revision typ thing 'cause swapping the JidDirect fixeds
it. I thinl they may cost a few hundred bucks but it may be worth it to
you.
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: 18 Aug 99 06:29:48 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: (A) Sherlock and Cmd-F doesn't work

"Melvin Wilson Jr." <melman@earthling.net> writes:
>I just installed Os 8.6.  I'm excited it kicks butt.  Anyway, During 
>the initial install Cmd-F would launch Sherlock.  Now it just launches
>the old Find File.  Any suggestions on how to get Cmd-F in the Finder
>to launch Sherlock?

Melvin:
Remove the old find DA and make sure that Sherlock is in the Apple Menu. I
think it wants to find it there for the key cmds to work.
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: 18 Aug 99 06:10:10 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: (A) twisted pair ethernet

a brody <abrody@smart.net> wrote:
>I don't know where I read it, but I heard it is possible to run an 
>ethernet Appletalk link between two Macs using a twisted pair cable 
>and no hub.   I got myself the usual 8x4 10 inch cable from Radio 
>Shack, and my Powerbook G3 doesn't seem to want to see my PowerMac 
>7200.  Both have MacOS 8.6 installed with base sets of extensions. 
>I have set up both drives to share, and still no luck.   The Chooser 
>doesn't see the other computer.   It works fine if I do a link 
>through the printer and printer/modem port.  It just doesn't work on 
>ethernet.
>
>Why not?   How can I get it fixed?

abrody:
You need a cross-over cable. That connects the transmit to the recieve and
the reciecve to the transmit wires. I think you should be able to buy one
by that name. The straight-through cable you've got is for connecting to an
Ethernet hub. Without a hub the straight-through cable has your Macs
listening to an ear and yelling into a mouth.
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: 18 Aug 99 05:52:36 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: (A) USB to SCSI vrs SCSI to USB

Paul Woodard <paul@woodard.kersur.net> writes:

>I've got two questions about USB to SCSI cables. All the advertizments for
>the USB to SCSI cables assume that you own a MAC with a USB port and that
>you have a device that has a SCSI connector.
>
>1) Can anyone tell me if the USB to SCSI cables will work with a older mac
>that has a SCSI port and a new device that has a USB connector?
>
>2) Is there any difference in a Mac USB to SCSI cable vrs a PC USB to SCSI
>cable?

Paul:
1 - Several companies - Orange Micro maybe, Keyspan makes a 2 port for 50
bucks.) are making PCI USB cards. I haven't seen such a creature for NUbus
macs. We're not likely to either.
2 - I'm guessing here but the "U" in USB is supposed to mean Universal. so
I'd say no, there's no difference in hardware, maybe you'd just just need
drivers.
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: 17 Aug 99 22:15:06 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: [A] How to convert records to CDs

Jochen Haeberle <listen@MIDRAS.de> asked:
>I would like to digitize all my old records and burn them to CDs. 
>record player is connected to my G3 and working, but now for the 
>software.... What can I use to process the recordings? I need to 
>break up the tracks and something like denoize and declickle would be 
>nice.
>I have been looking around, but all the music-programs seem to be 
>very expensive and aimed at professionals... is there anything in the 
>Shareware area? Or what comercial products can you suggest??

Jochen:
I've been doing this sort of thing for a couple months but I've been
converting them to MP3 files. I can get around 16 LPs to a CD. To digitize
the sounds into .aiff files I used a shareware called "Sound Sampler" for a
while. Then I switched to Macromedia's "SoundEdit 16". They both allow you
to record directly to disk and then to fade the beginning and end in and
out. The added advantage of the SoundEdit 16 is that it'll pull tracks
directly from CD and convert those to AIFF too. There are other utilities
that do this so if you don't plan on doing it  frequently then save your
money and go with the Sound Sampler. It's interface isn't quite as nice and
it hasn't been updated in a couple years but it does the job.
To get the .aiff files onto CD you need Adaptec's "Toast" or better yet,
"Jam".
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: Sun, 15 Aug 1999 12:17:58 -0400
From: Gill Robins <wrobins@charleston.net>
Subject: [Q] Can't communicate w/ Epson printer

While visiting a relative in DC, I was asked to look into a printer problem.

The setup:

Powerbase 180 Desktop
Epson 600 Serial Inkjet printer
System 7.6

The problem:

I can't get the Epson EX serial driver to find the printer. After selecting
in the chooser, it tries to print but can't locate the printer at all. This
is a recent problem as it has worked in the past. I disabled all
appleshare/printershare extensions and have turned appletalk off. I
reloaded Epson driver after downloading from their support site (older
version since this Mac is using older 7.6 system)

What am I missing here? Any ideas????

Wm. G. Robins
Architect
Mt. Pleasant, SC
wrobins@charleston.net

------------------------------

Date: Fri, 13 Aug 1999 17:01:45 -0400
From: Ben Barlow <bbarlow@rochester.rr.com>
Subject: [Q] How to convert records to CDs

Given that you've got a CD burner, the only trick is to get the old 
records digitized. There's a freeware program called Coaster (link 
below)

http://hotfiles.zdnet.com/cgi-bin/texis/swlib/hotfiles/info.html?fcode 
=MC18203&b=mac

that does just that. It recognizes gaps between songs, and can 
produce a folder of files. There's minimal cleanup, but some, and as 
you get older, the difference between the old vinyl and new plastic 
is harder and harder to distinguish. Of course, the multi-hundred $ 
programs probably do a better job, but it's tough to beat free.

Ben

------------------------------

Date: Tue, 17 Aug 1999 11:25:11 -0700
From: "Ton, Philong T" <Philong.Ton@PSS.Boeing.com>
Subject: [Q] How to correctly upload MP3 files to web

Hi,
Problem: Uploaded MP3 files don't work (no sound, just text)

I encoded some AIFF files with SoundJam 1.0, then uploaded them to our website using Fetch.  Fetch was set at "Automatic" file type detection.  When I went to the website to try to click on a MP3 file, instead of hearing sound, I got a bunch of garbled text.
The MP3 files sounded ok when I opened them up with QuickTime and other MP3 players locally, on my hard drive..

Questions:
Please teach me how to do this correctly.
1. Is Fetch the problem? I also tried with Anarchie Pro without success.

2. Are there special settings when encoding MP3 files which are to be uploaded on the web?

3. Are there special settings for MP3 files during uploading?

4. What are the correct step to upload MP3 files?

Thanks.

Phil
rent_me@hotmail.com

___________________________________
Philong Ton 
Org  : Structural Repair & Component Maintenance
Title: Engineer/Computing Focal
Email: philong.ton@pss.boeing.com
M/C  : 2H-60
Phone: (206) 544-8741

"It's wise to keep in mind that no success or failure is necessarily final." 
___________________________________

------------------------------

Date: Fri, 13 Aug 1999 21:57:02 -0700
From: "D & E Rogers" <rogersde@bc.sympatico.ca>
Subject: [Q] midi files on the web

Every time I encounter a midi file on the web, my computer freezes at about
the time I think it ought to start playing the sound.  Where do I need to
look to change my settings in order to prevent this?  (I have tried
un-checking "Play Sounds" in Explorer's preferences to get around the
problem, but no luck - it freezes anyway.  Of course, I would prefer to be
able to hear the sounds.)

Performa 6360
OS 8.6
Explorer 4.5

------------------------------

Date: Wed, 18 Aug 1999 00:42:48 -0800
From: "David L. Ellis" <dellis@halcyon.com>
Subject: [Q] Sherlock search of Info-Mac files?

I would like to know if there is a Sherlock plugin for the 
HyperArchive or other collection of Info-Mac files?

David L. Ellis

------------------------------

Date: 18 Aug 99 06:15:20 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: Apple Multiple Scan 17" Display

NightFire@DeathsDoor.com (NightFire) wrote:
>I have an Apple Multiple Scan 17" Display on a PC using Windoze 98.  I was

>wondering if anybody knew which monitor profile is the best to use.  Where
>to 
>get info on finding out which profiles should be used?  I went to the
Apple 
>site and found specs on the monitor but cannot figure out which profile
>would 
>be best.  Any help on this matter would be greatly appreciated.

Night:
I think I may have one of the Windoze drivers disks that came with an Apple
multiscan monitor. I can't tell what all the stuff on it is but I'd be glad
to disk image it for you and send it along. Have you got a Mac you can
access the image file on?
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: Wed, 18 Aug 1999 00:07:36 -0700
From: Dan Frakes <Dan@InformINIT.com>
Subject: Apple Studio Display 15 Color Calibration

Dieder Bylsma <bylsma@home.com> wrote:
>I am the proud new owner of an Apple Studio Display 15...Apple's Flat 
>Panel LCD desktop unit. It is beautiful and ridiculously crisp and 
>easy on the eyes.

Dieder:

Welcome to the club -- I got one refurbished last week. Great display, 
great design, takes up so little space compared to the 17" monitor it is 
replacing!

>However, I'm having a devil of a time setting up a 
>colour calibration for the LCD since the contrast changes depending 
>on the angle between the monitor and the viewer. In fact, using the 
>ColorSync calibration dialogues, where there are the three Apples to 
>calibrate, I can get different results, even with everything 
>identical, viewing position, monitor position etc just by moving the 
>calibration dialogue from one part of the monitor to the other (i.e. 
>from centre to bottom centre, top centre etc).

A few tips:

1) Start up your computer and let the monitor sit (turned on) for about a 
half an hour before you do any calibration/adjustments. It takes the 
Studio Display LCD about 30 minutes to "warm up" completely.

2) Be sure to read the instructions for "getting the best picture" that 
came in the box with the display. Do everything else _before_ you do the 
color calibration.

3) As for the color calibration, the best way to do it is to put the 
color calibration dialog smack in the center of the screen, and then 
position the screen so that you are looking directly at it, getting the 
angle that provides you with the clearest, brightest picture. Then do the 
calibration. Another tip... when you do the "three Apples" part of the 
calibration, don't look directly at each Apple. Look at the one next to 
it when you are adjusting the levels. This sounds strange, but it will 
give you a better level. For example, when you are adjusting the setting 
for the left apple, look at the middle apple so that you are seeing the 
left apple via peripheral vision. Set the level for it when you can't 
tell the difference between the apple and the surrounding area (via 
peripheral vision). Getting this setting correct is sometimes very 
difficult if you look directly at the apple, but very easy to do with 
peripheral vision. Try it!

>So, should I give up with the idea of using the display for 
>hue-sensitive, colour-sensitive work with photo-editing and 
>photo-retouching and get an additional analogue tube-monitor for 
>colour correction? Or am I missing something?

LCD panels are unfortunately not a good for color-sensitive 
(colour-sensitive for you Canadians ;-) ) work. Because of the variance 
between brightness and contrast across the screen, they just aren't as 
accurate. But they are usually easier on the eyes because there is no 
annoying continual screen refresh like on a CRT.

    Dan@InformINIT.com
<http://www.InformINIT.com>

------------------------------

Date: Sun, 15 Aug 1999 19:46:49 -0400
From: a brody <abrody@smart.net>
Subject: Apple's PCMCIA -> USB card drivers

Dear Digest readers,
I just bought a PCMCIA Cardbus card that has a USB two port cable 
attached to it so I could use USB on my Wall Street Powerbook.   Made 
by Paragon, I can't find the drivers for it.   I do have VirtualPC 
with Windows 98, as well as the 1.3b2 USB drivers which somebody at 
CompUSA helped me get for the Mac.   I tried hooking up the iMac 
mouse to it, and after a few minutes of working, it froze.  Granted 
it was a beta version of the driver, but I wondered if somebody 
actually figured out a way to get the drivers to work consistantly? 
The CompUSA expert knew of resediting one resource to get it to work 
partly, anybody know anything more?

I have one month to return the card, and would rather not, seeing 
that ViaVoice is only going to be USB compatible, and if I have the 
hardware already I'd like to know that the software is coming, and 
where to download them from.

Thank you.
Sincerely,
abrody@smart.net
Check out over 700 internet sites updated monthly at:
http://www.index-site.com

------------------------------

Date: Fri, 20 Aug 1999 08:42:06 -0400
From: Patty and Art Werschulz <agw@home.com>
Subject: Boot problem

Hi.

Platform:  Power Macintosh 63/266MHz Desktop Model
OS: MacOS 8.6.1

The following has been happening recently, when I boot my Mac:

After the usual startup sound, there is a pause of a few seconds (during
which the Mac makes what seems to be the usual disk noises).  But then I
hear (for lack of a better description) the sound of breaking glass
(from the speaker).  Nothing else happens.

I'm now having to do the boot cycle three or more times (as a rule) to
get the Mac to successfully boot.

What does all this mean, and what is the fix?

Thanks.

-- 
  Patty and Art Werschulz http://members.home.net/agw/
  1 Marsh Street Cranford NJ 07016 (908) 272-1146

------------------------------

Date: Sun, 15 Aug 1999 17:29:26 +1000
From: Perry Karipidis <pk@deskcon.com.au>
Subject: DVD on Macintosh

Hello there. I would appreciate it if someone could help re DVD on Mac.

I have a multi-region DVD player for my home-theatre setup. Australia is
Region 4 with very limited movie titles. I purchase region 1 DVDs from
DVDExpress in the USA. However, I also purchase some region 4 DVDs
locally. Here is the problem.

I plan to upgrade to a Mac G3 with a DVD-ROM player. I have been told
that once I play five titles of a particular region on the Mac, the
player will lock into that region. I will not then be able to play my
region 4 titles on the Mac.

I understand the piracy issues involved, but I purchase ALL movies
legitimately. I have heard that there is software available that will
allow one to reset the region barring on the fly on  PCs. I have also
been told that  software to do is also available for the Mac. Does
anyone know what this software is? Where can I purchase it?

--
Regards Perry Karipidis
Desktop Concepts Pty Ltd
ACN 054 973 634
207A Upper Heidelberg Road
Ivanhoe Victoria Australia 3079

Tel: (613) 9499 5749
Fax: (613) 9499 7983

Website: http://www.deskcon.com.au
Mailto:pk@deskcon.com.au

------------------------------

Date: Thu, 19 Aug 1999 11:43:55 -0400
From: "Ricardo J. Seijo" <screaming@vt.edu>
Subject: eudora-to-browser problem

Hi.

I am having a problem clicking on URL's that appear in e-mail messages.  I
recently set up a new iMac and I had never had the problem before.  When I
receive an e-mail with a URL, the URL appears highlighted in blue and
underlined as it should be, but when I click on it, I get the following
message:
	"Sorry; couldn't start that application.
		-39, {url:283}"
Theoretically, it should just open the default browser and go to the
particular site automatically.  Does anyone have any input?  Thanks in
advance!

RJS

------------------------------

Date: Sat, 14 Aug 1999 14:16:09 +0200
From: Patrick Maes <p-maes@village.uunet.be>
Subject: FindText: Searching in MS-Word documents

Information about a "problem" with FindText.

Dear FindText user,

Problem:

Sometimes FindText does find the text in MS-Word documents, sometimes 
it doesn't.

Solution:

You can search in MS-Word when you disable the "fast save" feature in MS-Word.

Microsoft Word 98:
Go to "Preferences..." in the "Tools"-menu.
Choose the "Save" preferences and make sure there is no checkmark 
next to "Allow fast saves".

The most recent version is always available on the Info-Mac servers 
(FTP). You can find a list of these servers at my FindText homepage 
http://gallery.uunet.be/p-maes/index.html.

Best regards,
Patrick Maes.

------------------------------

Date: Fri, 13 Aug 1999 13:27:17 -0700
From: Bruce Johnson <johnson@pharmacy.arizona.edu>
Subject: Floppy Drive

> Subject: Floppy drive needed
> Date: Wed, 11 Aug 1999 14:58:54 -0500
> From: Charles Stang <stang@muhs.edu>
> 
> The floppy drive on my PowerComputing PowerBase 200 (low Profile) quit.
> (A Sony 2MB Model MPF92A)  I would like to replace it, but I don't use
> it that much and don't want to pay $150 for a new one.  Any suggestions
> where I might find a refurbished or use one?
> 
> Charley Stang

Shreve Systems has 'em for $49

http://www.shrevesystems.com/

Good folks, I've bought from them in the past.

Another good source for Mac parts (esp older ones) is Timco Computers

http://www.timco.com

-- 
Bruce Johnson
University of Arizona
College of Pharmacy
Information Technology Group

------------------------------

Date: Fri, 13 Aug 1999 15:09:39 -0500
From: Chaz Larson <chaz@visi.com>
Subject: Floppy drive needed

At 2:58 PM -0500 8/11/99, Charles Stang wrote:
>The floppy drive on my PowerComputing PowerBase 200 (low Profile) quit.
>(A Sony 2MB Model MPF92A)  I would like to replace it, but I don't use
>it that much and don't want to pay $150 for a new one.  Any suggestions
>where I might find a refurbished or use one?

You might consider buying a used SuperDrive-equipped Mac, perhaps on 
eBay, and use the floppy from it.  I've seen LCs go for $20 or so.

I have also seen refurbished floppies available at a variety of online vendors.

<http://www.shrevesystems.com/floppydrives.html>
<http://www.macresq.com/product/floppies.html>

chazl

Some nights I still sleep on the beach ... Remember when stars were in reach.
Then I wander in early to work; spend the day licking boots for my perks.
                                                            - The Who, Bell Boy
Chaz Larson     -    chaz at spamcop dot net    -    http://www.visi.com/~chaz

------------------------------

Date: Thu, 19 Aug 1999 18:09:38 -0400 (EDT)
From: Charles Myers <charles@umbc.edu>
Subject: G3 and music CDs from vinyl or tapes 

Hi,

 I am currently considering buying a Mac G3 and I had a couple questions. 
One of the tasks I definitely want to do is convert my old records onto
CD. How do you do this? Would I need to buy an extra audio card, I'm
assuming; which ones are recommended? Would I record the music with
quick time? Have you done it with cassette tapes also? I'm wondering how
the quality of the recordings will be if I do make CDs from vinyl or
cassette. Thanks for any info. 

Charles Myers 

> Subject: [Q] How to convert records to CDs
> Date: Tue, 27 Jul 1999 10:55:29 +0200
> From: Jochen Haeberle <listen@MIDRAS.de>
>
> Hi,
>
> I would like to digitize all my old records and burn them to CDs.
> record player is connected to my G3 and working, but now for the
> software.... What can I use to process the recordings? I need to
> break up the tracks and something like denoize and declickle would be
> nice.

------------------------------

Date: Fri, 20 Aug 1999 17:20:17 +1200
From: "Markus Winter" <m.winter@auckland.ac.nz>
Subject: Help with Epson Stylus Color 900 needed

Hi all,

our lab just bought an Epson Stylus Colour 900, and as the resident "Mac
expert" it was up to me to connect it to our G3 (128 Mb, OS 8.6). However
I'm running into heaps of problems:

good news: colour printing works fine from MS Word98

bad news : out of memory errors when trying to print a pdf file using
           Adobe Acrobat (I've given Acrobat 30 Mb RAM, and there are
           600 Mb free on the HD)

           print job is sent off in PageMaker 6.5, but nothing happens

All print fine via our network to our Apple Laserwriter 16/600.

I haven't tried any other programs yet, but something seems very wrong - and
we need the printer for one of our students who has to hand in her thesis by
next week, so any help is greatly appreciated.

And while I'm here - how do I find out which graphic card our G3 (desktop,
233 MHz) has so that I can turn off unused extensions?

Thanks to all who can offer advice, and please reply directly to me and I
will summarize for the list:  m.winter@auckland.ac.nz

Markus

--

Dr. Markus Winter
Department of Molecular Medicine
Room 3301
School of Medicine
85 Park Road
Grafton
Auckland
New Zealand
Tel: 373 7599 ext 3960

------------------------------

Date: Mon, 16 Aug 1999 14:20:30 EDT
From: NeoMarktng@aol.com
Subject: HELP!  Apple AudioVision14 Monitor, 11" viewable

Hi,

I have a Mac 71/66AV with a AudioViosion14 with the High density cable that 
is hard wired, that has now a 11" viewable area on the screen instead of the 
13" it's supposed to have.  I have done everything to try to correct it: new 
sys, updated monitor software, reset monitor and tried all kinds of 3rd party 
stuff.

It also will not allow me to turn off that it thinks a TV set is connected to 
it and so my cursor disappears to a ghost sceen when moved to the border of 
the monitor so it's seeing 2 desktops.

I am going blind with such a small view area and have called Apple, went to 
tech info etc. with no luck.  They are not sure either......  Really need 
some help.

Thanks,
Mark

------------------------------

Date: Sat, 14 Aug 1999 03:33:15 +0200
From: Yvonne Steiner <ysteiner@bluewin.ch>
Subject: Info-Mac Digest/ message/rfc822

> Part 1.2.9Type: message/rfc822/Speeddoubler + StartupIcons

I had the same problem once.

After solving the problem I wrote down this notice: 

   The cause was in *display preferences*

That means, in my system folder I had two *display preferences*, one in
English Version, the other in German.
Since I trashed the English one ... no more Problems.

May be this could help you

Yvonne

------------------------------

Date: Fri, 13 Aug 1999 19:24:59 -0400
From: ptbrown <ptbrown@iname.com>
Subject: Need help changing default system icons

Jesse Shaver said...

>I'm running a OS 8.0 on a G3. I've got tons of funky icons, and I want to 
>use them as the default icons for my system (e.g. when I make a new folder, 
>I want it to come with a custom icon).

The 3-D icons exist in the Appearance extension. If you are 
brave/bold/foolish enough to modify this, always, _Always_, *ALWAYS* 
operate on a copy of the file. This isn't just another ResEdit safety 
tip, but an absolute requirement when dealing with System Folder files.

But instead of modifying any system files, get Kaleidoscope and take a 
few moments to learn how to create scheme files. This is a much safer and 
more elegant way. (If slower and memory consuming... but you've got a G3, 
you can spare a few cycles)

* All opinions expressed are yours; you have only yourself to blame. *

------------------------------

Date: Fri, 13 Aug 1999 15:41:12 -0500
From: Chaz Larson <chaz@visi.com>
Subject: Need help changing default system icons

At 1:28 PM -0400 8/10/99, Jesse Shaver wrote:
>I'm running a OS 8.0 on a G3. I've got tons of funky icons, and I want to
>use them as the default icons for my system (e.g. when I make a new folder,
>I want it to come with a custom icon).

Your plan might not have the effect you want, but more on that later.

>I assumed that the default icons would be in the system file, but when I
>opened it in ResEdit, the icons it displayed in the icl8 resource were
>old-looking, 2D folders, whereas the default on my computer is 3D blue
>folders. If that particular icon resource isn't stored in the system file,
>where is it?

They are in the System file.  I just checked the System File on my 
MacOS 8.0 and 8.1 CDs, and the icons are the flat blue ones.  The 
angled 3D ones first appear in the stock MacOS in 8.5.  If you're 
running MacOS 8.0 and you have the angled folders, you must have 
Kaleidoscope [or Aaron or NewLook or something like that...] 
installed.

If you were running MacOS 8.0 without any third-party extensions, you 
could modify those ICN# resources and every new folder would get your 
replacement icon.  If you're running Kaleidoscope [ or Aaron or ...], 
you could modify its resources to the same effect.

However, this will not accomplish your stated goal of making "new 
folder[s] ... come with a custom icon".  It will make the default 
icon change *on your machine*, but if you copy one of these folders 
to another Mac, its icon will revert to the standard one, since the 
folder really wouldn't have a custom icon.  As far as the MacOS is 
concerned that folder would have the default icon, which on your 
machine would happen to be a picture of Charlie Tuna or whatever. 
Maybe that's good enough for your purposes.

If you really wanted to add a custom icon to every new folder, you 
could gin up a little AppleScript that would create a new folder in 
some location and actually give it a real custom icon that would 
travel with it.

HTH.

chazl

Some nights I still sleep on the beach ... Remember when stars were in reach.
Then I wander in early to work; spend the day licking boots for my perks.
                                                            - The Who, Bell Boy
Chaz Larson     -    chaz at spamcop dot net    -    http://www.visi.com/~chaz

------------------------------

Date: Mon, 16 Aug 1999 16:56:04 -0700
From: "Daniel O'Donnell" <danod@pacbell.net>
Subject: open a PM 6500?

I don't know the answer, but have seen it asked and answered several times
on the Mac Managers' listserv. You can search their archives for the answer
at <http://archives.mac-mgrs.org/>.

HTH,

DOD

At 9:55 PM -0400 on 8/12/99, Robert Dalton wrote...
>Anybody know how to open a PowerMac 6500? No, we don't need to get at
>the logic board, we need to remove a Zip Drive (click of death) for
>repair (to ship to Iomega).
>
>-Bob
>rsdalton@lycosmail.com

------------------------------

Date: Mon, 16 Aug 1999 10:09:32 -0400
From: Robert Dalton <rsdalton@lycosmail.com>
Subject: open a PM 6500?

At 9:58 PM -0500 8/14/1999, Ed Holloman wrote:
>Do you have the original manual that came with it? It has instructions
>on opening the case to add/remove components. I took the internal modem
>out of mine; very straight forward.
>
>Ed
>
>
> > Subject:
> >            open a PM 6500?
> >      Date:
> >            Thu, 12 Aug 1999 21:55:00 -0400
> >      From:
> >            Robert Dalton
> >
> >
> >
> > Anybody know how to open a PowerMac 6500? No, we don't need to get at
> > the logic board, we need to remove a Zip Drive (click of death) for
> > repair (to ship to Iomega).
> >
> > -Bob
> > rsdalton@lycosmail.com
> >

The original manual tells us how to remove the logic board. We need 
to remove the Zip Drive (not on the logic board).

-Bob
rsdalton@lycosmail.com

------------------------------

Date: Sat, 14 Aug 1999 21:58:57 -0500
From: Ed Holloman <holloman@airmail.net>
Subject: open a PM 6500?

Do you have the original manual that came with it? It has instructions
on opening the case to add/remove components. I took the internal modem
out of mine; very straight forward.

Ed

> Subject:
>            open a PM 6500?
>      Date:
>            Thu, 12 Aug 1999 21:55:00 -0400
>      From:
>            Robert Dalton
>
>
>
> Anybody know how to open a PowerMac 6500? No, we don't need to get at
> the logic board, we need to remove a Zip Drive (click of death) for
> repair (to ship to Iomega).
>
> -Bob
> rsdalton@lycosmail.com
>

------------------------------

Date: Wed, 18 Aug 1999 22:17:40 -0500
From: "Maynard" <maynard@macol.net>
Subject: PowerWave to G3 card

Iain,

I am running a MAXpowr G3 upgrade card and has run great
under System 8.1 through 8.6.
You can check with Newer Technology at www.newertech.com.
There are speeds from 300MHz to 466MHz.

iain antony macleod <i.macleod@agora.stm.it, Wrote:

Hi everyone,
just about made the leap and buy a new G3 (cheap at first, but when filled
with all the SCSI, cables, adapters, usw), I decided to stick to my (old)
Power Computing Power Wave 120 for a while more.
I decided that a G3 update card would be the solution to avoid the $4,000.
Can someone recommend a working G3 card solution on a PPC?

What are the costs and can I install a Sys8.6.1without trouble?
Please attach URLs.

Thank you
iain antony

------------------------------

Date: Wed, 18 Aug 1999 20:54:52 +0530
From: rkdeshpande <rkdeshpande@inf.com>
Subject: Printing on a Mac

How do one print to the serial port? 
What is the call? 
Which header files need to be included in the project?

I am using Codewarrior 1.6
I saw one OpenDriver call to open an driver. But I could not compile the
code. I included Devices.h file in the project.

Regards
R K Deshpande

------------------------------

Date: Sun, 15 Aug 1999 10:26:34 -0400 (EDT)
From: "Reuben Halper" <reuben@spacelab.net>
Subject: ssh or secure telnet for Macs?

Are there any ssh, or secure telnet clients available for the Macintosh?

-Reuben

------------------------------

Date: 18 Aug 99 06:37:42 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: The Fate of Info-Mac

Allan Hunter <ahunter3@earthlink.net> wrires:
>Finally, I receive a new issue of Info-Mac (V16 #329), and it contains 7
>postings, the oldest of which date back to July 26; three of them are
>notices of the availability of TIDBits.  This is scary!  Info-Mac has
>traditionally been the place to send newbies to learn by reading and
>observation (and to ask their own questions), and was more useful than 2
>years of free technical support from Apple, not to mention being the
>central repository for new shareware and freeware postings / descriptions.

Allan:
I missed it too but just assumed it was because of summer vacations and
less traffic. (I know that's a pretty "north half of the northern
hemisphere" kind of assumption - sorry Aussies). Maybe we all need to
participate more. I usually answer questions off the list responding to the
writer directly to cut down on noise but - as you'll see from looking back
up the list - this time I'm polluting the list in the hopes of generating
more discussion.
Let's all pitch in.
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: Fri, 13 Aug 1999 15:46:49 -0500
From: Rafael Figueroa <knight@mvp.net>
Subject: USB to SCSI vrs SCSI to USB

>1) Can anyone tell me if the USB to SCSI cables will work with a older mac
>that has a SCSI port and a new device that has a USB connector?
>
>2) Is there any difference in a Mac USB to SCSI cable vrs a PC USB to SCSI
>cable?

Hello,

I have had the same thought on my mind for a while. I have a G3 
upgraded 7100AV and have been wondering if a manufacturer will/would 
ever make a USB adaptor for those models older (non PCI) models.

Any feedback would be greatly appreciated.

Regards,

Rafael Figueroa

------------------------------

Date: Fri, 13 Aug 1999 14:59:27 -0700
From: "Adam C. Engst" <ace@tidbits.com>
Subject: What Happened to Info-Mac Digest?!

>Gawd!  First, I just noticed that an Info-Mac Digest came - The first
>one since 27 Mar 99, V16 #278!

Hmm, there have been quite a few since then, but email delivery has 
been one of the problems we're hoping to solve (see below).

> Whot Hopp'in, Mon?!  Second, I didn't
>notice I wasn't getting it.  The web & all the great sites like
>Macintouch.com, MacFitit, Deal-Mac, MacResource. etc.  I'm ashamed!
>Al, it's all your fault!  (Have to blame it on somebody...)

Actually, the problem is that our Unix systems are starting to break 
down and rather than put a ton of work into fixing them, we're taking 
the opportunity to move stuff over to more modern setups.

Frankly, as a general Macintosh mailing list, the Info-Mac Digest 
isn't serving any unique needs any more. What's more important in our 
minds is the Info-Mac Archive, which remains one of the most 
important methods of distributing Macintosh software on the Internet. 
That's where we've been focusing most of our attention (and where 
most of the problems have been occurring).

But don't worry, work is being done behind the scenes. Things just 
take a bit longer than would be ideal sometimes when you're talking 
about a non-profit, volunteer organization like Info-Mac (which isn't 
true of any of the Web resources you mention).

cheers... -Adam

--
Adam C. Engst, Info-Mac Senior Moderator -- <adam@info-mac.org>

------------------------------

Date: Fri, 13 Aug 1999 15:52:38 -0400
From: Tom Coradeschi <tcora@pica.army.mil>
Subject: Whot Happened to Info-Mac Digest?!

Dwight Early <earlyd@erinet.com>
>Gawd!  First, I just noticed that an Info-Mac Digest came - The first
>one since 27 Mar 99, V16 #278!  Whot Hopp'in, Mon?!  Second, I didn't
>notice I wasn't getting it.  The web & all the great sites like
>Macintouch.com, MacFitit, Deal-Mac, MacResource. etc.  I'm ashamed!
>Al, it's all your fault!  (Have to blame it on somebody...)

Dwight! You've missed a buncha them! Hit Hyperarchive or your fave mirror
site and pick up the back issues.

tom coradeschi
tcora@pica.army.mil

------------------------------

Date: Thu, 19 Aug 1999 09:23:48 -0700
From: Buzz & Mary Bennetts <buzzb@presys.com>
Subject: World Book CD

I am a (expert) volunteer at a local library that just bought its first
iMac. They wanted to install everything from both World Book
Encyclopedia CDs that came with the iMac onto the hard drive. They did
not want the CDs to disappear in use by the 6- thru 12-aged users.

I first installed the basic application; then the data from each of the
two CDs onto the HD, and labeled them exactly the same as each CD is
labeled. I put them into the World Book folder. I have done similar
things with CDs many times, and they always have worked fine, but this
application keeps calling for the appropriate CD.

I emailed the World Book folks, who answered there is no way to make it
work that way. I find it hard to believe. Does anyone have a suggestion?

Thanks!

Buzz Bennetts

--------------------------------

--Info-Mac-Digest--

End of Info-Mac Digest
******************************