Subject: Info-Mac Digest V16 #345
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="Info-Mac-Digest"

--Info-Mac-Digest

Info-Mac Digest             Tue, 05 Oct 99       Volume 16 : Issue 345

Today's Topics:

      [*] TidBITS#500/04-Oct-99
       Oops, mea culpa (was: couple questions) 
      (A) How read Word into Quark!
      [A] Czech Mac Font needed
      [A] File type for HTML: TEXT or HTML
      Acrobat Distiller
      Apple 15 Multiscan AV Repair?
      Decoding files ending in *mim* or *mime*
      Dual modem connection to Internet
      edsiting sound
      LaserWriter II: Stopping Test Pages
      LP's to AIFF files continued
      MacGZip problem
      Making Karaoke file from CD
      Print Spooling Errors on B&W G3
      sound
      sumex submissions

The Info-Mac Network is a volunteer organization that publishes the Info-Mac
Digest and operates the Info-Mac Archive, a large network of FTP sites
containing gigabytes of freely distributable Macintosh software.

Email Addresses and Instructions:
* To submit articles to the digest, email <mailto:digest@info-mac.org>.
* To subscribe, send email to <info-mac@starnine.com> with subscribe in
  the Subject line. <mailto:info-mac@starnine.com?subject=subscribe>
* To unsubscribe, send email to <info-mac@starnine.com> with unsubscribe in
  the Subject line. <mailto:info-mac@starnine.com?subject=unsubscribe>
* To change your address, unsubscribe from the old address, then subscribe
  from the new address. If that fails, try using the list maintenance
  form at <http://info-mac.starnine.com/> before contacting us.
* Please send administrative queries to <mailto:moderator@info-mac.org>.
* To submit files for the archive, email the binhexed file with a
  description to <mailto:macgifts@info-mac.org>. Submissions must be made
  by the author or with permission of the author. It may take up to a week
  to process; check mirror sites for the status of new uploads.

FTP and Web Addresses and Instructions:
* To submit files larger than 800K, email a description to 
  <mailto:archivist@info-mac.org> and then use an FTP client to upload the 
  binhexed file to info-mac.org, using the userid "macgifts" and the
  password "macgifts". Or, click <ftp://macgifts:macgifts@info-mac.org/>.
* A full list of Info-Mac mirror sites is available at the URL below:
  <http://hyperarchive.lcs.mit.edu/HyperArchive/Archive/help/mirror-list.txt>
* Search the archive at <http://hyperarchive.lcs.mit.edu/HyperArchive/>.

Info-Mac volunteers include Gordon Watts, Adam C. Engst, Demitri Muna,
Michael Bean, Liam Breck, Hugh Lewis, Tom Coradeschi, and Shawn Bunn.

The Info-Mac Digest is sponsored in part by StarNine Technologies, developers
of Internet server software for the Macintosh, including Web and email
publishing systems. <http://www.starnine.com/> We'd also like to thank AOL for
the main Info-Mac machine. <http://www.aol.com/>
----------------------------------------------------------------------

--Info-Mac-Digest
Content-Type: multipart/digest; boundary="----------------------------"
Content-Disposition: attachment; filename="Info-Mac Digest V16 #345"

------------------------------

Date: Mon, 4 Oct 1999 21:00:00 -0700
From: TidBITS Editors <editors@tidbits.com>
Subject: [*] TidBITS#500/04-Oct-99

TidBITS#500/04-Oct-99

We celebrate the 500th issue of TidBITS with a redesign of our home page,=
 including the addition of weekly polls and quizzes. Also this week, Adam=
 weighs in with the first part of an article on how he's come to see the=
 light of the MP3 format for music. In the news we cover the releases of a=
 free update to Retrospect 4.2, Retrospect for Windows, Netscape=
 Communicator 4.7, and FileMaker Pro Web Companion 5.0v2, plus cheaper=
 prices on Palm handhelds.=20

Topics:
    MailBITS/04-Oct-99
    Five Hundred Issues and a New Home Page
    That MP3eaceful, Easy Feeling, Part 1

<http://www.tidbits.com/tb-issues/TidBITS-500.html>
<ftp://ftp.tidbits.com/pub/tidbits/issues/1999/TidBITS#500_04-Oct-99.etx>

[Archived as /info-mac/per/tb/tidbits-500.etx; 30K]

------------------------------

Date: Mon, 04 Oct 1999 17:52:32 +0000
From: "Cyrus Roton" <croton@iwvisp.com>
Subject:  Oops, mea culpa (was: couple questions) 

Subject: Oops, mea culpa (was: couple questions)
"Charles Arthur, The Independent" <carthur@independent.co.uk> wrote:
>There are commercial packages and even freeware
>I've come across which lets you connect PC parallel printers to serial Macs.

There you go again, mistaken again. Software can not convert serial to
parallel. Serial data flows along a single loop, with the data bits
appearing as pulses along a time axis. Parallel data flows along eight
parallel loops, with all eight data pulses appearing at the same time. To
convert from serial to parallel requires a serial-to-parallel converter
(hardware). Trust me on this. I know this stuff.

Cyrus Roton <croton@iwvisp.com>
MITA tech
Chairman, Ridgecrest Apple User Group
Senior Field Service Engineer, Data General, retired

------------------------------

Date: 4 Oct 99 22:19:23 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: (A) How read Word into Quark!

Will Wagers <hyle@airmail.net> asks:
>I can see the Word translators for my quark, but how do I invoke
>them to input a Word file into Quark 3.0?
also:
>I have a 6GB drive on a PowerMac 6500/300. What backup systems are
>recommended?

Will:
You need to have Microsnot's OLE (Object Linking and Embedding) installed.
That's their set of system extensions that allows you to put bits of word,
PowerPoint & Excel documents into each other and do mail merges etc. XPress
needs it to place the formatted Word documents when you ask it to Get Text.
There should be an OLE install disk with the rest of your XPress install
disks.

For back-up I recommend Retrospect by Dantz with a DAT drive. I think
they'll do volumes that large.

- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: Mon, 04 Oct 1999 19:07:55 +0200
From: nhtcapri@rrzn-user.uni-hannover.de (Andreas Prilop)
Subject: [A] Czech Mac Font needed

In article <7talc4$chv$1@grapevine.lcs.mit.edu>,
Rodney Schmidt <schmidtr@mail.ecu.edu>wrote:

> Our School of Music uses PageMaker 6.5 to print all concert programs. For 
> an orchestra tour that includes Czechoslovakia we need to prepare program 
> notes in that language. A Czech keyboard emulator for Windows exists. Is 
> there a Czech font for the Mac that can generate postscript for PageMaker 
> printing?

There is no such thing as a Czech font. You need Central European (CE)
fonts. Both free and commercial CE fonts exist for Macintosh.
<http://hyperarchive.lcs.mit.edu/cgi-bin/NewSearch?key=central+european>
These files on Info-Mac also contain references to CE fonts.

------------------------------

Date: Mon, 4 Oct 1999 21:04:06 -0400
From: Ken Laskey <kenneth.j.laskey@saic.com>
Subject: [A] File type for HTML: TEXT or HTML

Jacob Palme wrote expressing concern about media type text/html.  As 
XML use and the structures for supporting use grow, the world as we 
know it will be expanded.  The purpose of a draft such as the IETF 
one noted is to get feedback on how the world is proposed to change 
and to let application designers prepare for it.  The issue is a 
bigger one than the Macintosh community, and the goal is to expand 
capability and not to break what works.

Ken Laskey
kenneth.j.laskey@saic.com

------------------------------

Date: Mon, 4 Oct 1999 19:41:20 -0700
From: Doug Hardie <bc979@lafn.org>
Subject: Acrobat Distiller

I am using Acrobat Distiller 3 to create a few documents for distribution
on our web server.  However some documents are not readable when viewed via
a browser.  Some people can read them fine.  Others get errors or blank
pages.  On one document when I view it through the browser I get just dots
for each character.

If the files are downloaded to disk and then you run reader, they all read
fine.  I have set for Embed all fonts.  However, on the one page that gives
me all dots, I get a dialog about a font where the name is completely
munged at front.  The last part is one of the fonts I used in the document.

Any ideas what I am doing wrong?

-- Doug

------------------------------

Date: Mon, 4 Oct 1999 14:16:49 -0500
From: John Mather <jcmather@facstaff.wisc.edu>
Subject: Apple 15 Multiscan AV Repair?

>I am having problems with the red color in my Apple 15 Multiscan AV monitor.
>I understand that this is a known problem, but Apple's response to the
>problem ($200 for repair) does not meet my needs. According to some
>discussion on the Apple Tech Exchange, the problem is due to a bad solder
>joint.
>
>Could someone please identify the joint to be repaired?

Allan,

Check this series of articles in MacFixit:
http://www.macfixit.com/archives/september.99.c.shtml#scan15-09-23

The articles refer to an unpublicized warranty which I was able to 
use to get my  Apple 15 Multiscan AV monitor repaired for free. It 
took me sometime to reach the right person at Apple (don't have that 
info here at work). I described my situation, which I assume is the 
same as your's..... at first intermittent miscolor as the red turns 
off and finally a permanent very blue-green screen. They sent me a 
box with a UPS shipping label. I put the monitor in the box, called 
UPS for pick up. Poof! One week later the monitor was back repaired. 
No cost!

Now you will see from the MacFixit articles that it didn't work for 
some folks. Apple has all kinds of qualifications on their 
responsibility and your right to this warranty. But the bottom line 
is if you reach the right person and your problem is the one they 
have designated they will likely do the repair. Perhaps because it 
has been publicized on the 'net they were overwhemled and decided to 
be more selective. Just be nice and persistent.

And Apple, if your listenin', Thanks! (Though I was looking forward 
to a new 21" Display. ;-)  )

John
*-*-*-*-*-*-*-*-*-*-*-*-*-*
John Mather
6524 County Trunk  K
Blue Mounds  WI  53517-0105
voice & fax:608/795-4636
jcmather@facstaff.wisc.edu
*-*-*-*-*-*-*-*-*-*-*-*-*-*

------------------------------

Date: Mon, 4 Oct 1999 15:09:48 EDT
From: Rjfield@aol.com
Subject: Decoding files ending in *mim* or *mime*

I would like to know if there is a shareware program that will decode files 
ending in *mim* or *mime*. I am using a Performa 6300CD with System 7.5.5. I 
connect to the internet via AOL.

Thanks in advance.

Bob

------------------------------

Date: Mon, 4 Oct 1999 17:56:37 EDT
From: JanusRuhk@aol.com
Subject: Dual modem connection to Internet

I am inquiring whether any company (or individual) has produced 
software/hardware allowing a Mac computer to connect to an Internet provider 
via two modems (a thereby double your connection speed). I know such software 
is available for PCs, but nothing for Macs. Any help would be greatly 
appreciated!

Janus Ruhk

------------------------------

Date: Mon, 4 Oct 1999 16:13:05 EDT
From: Luskin@aol.com
Subject: edsiting sound

Mr. Kars asked about programs to input sound files in order to edit them. 
There are several.  Peak and Peak LE seem to be the cream of the crop, but 
others are good as well.  There are three steps in the CD manufacture 
process.  YO have to get the sound into the machine, you have to edit/listen 
to it, and you have to burn the CD.  

The last is the easiest. Toast is one of the high quality CD burning programs.

Soundapp, soundedit, raygun and peak deal with the first two problems.  
Editing sound is an art, and one gets better at it with age -- like bourbon 
and tennis.  It appears that peak le, though formidable in all it can do, is 
pretty easy for beginners to work with.

There is a good list, BIAS run by Steve Berkley, the author =of Peak, and it 
answers all problems dealing with the Mac and sound.  I am very satisfied 
withthe help, and the amount of help I have gotten form them, on and off 
list.  In addition, Berkely is flexible.  

Michael B. Luskin

------------------------------

Date: 4 Oct 99 22:52:46 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: LaserWriter II: Stopping Test Pages

>From: kuo@cheerful.com (Kuo)
>Subject: LaserWriter II: Stopping Test Pages
>
>Hi all,
>My Calculus teacher has this LaserWriter II, and I was wondering if
>there's any way to stop it from printing a test page everytime it's turned
>on...

Kuo:
You can turn that off using "Apple Printer Utility".
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: Mon, 4 Oct 1999 18:30:50 -0500
From: John Koloen <jkoloen@earthlink.net>
Subject: LP's to AIFF files continued

You can use SndSampler to record individual tracks. I believe you can do
the same thing with Coaster. Or you can record an entire album side with
SndSampler and cut and paste tracks together by segmenting and joining.

>there's been lots of good suggestions about transferring whole albums to
>AIFF files but as we all know, there are sometimes only a few gems on an
>album. Anyone out there know of an app for selectively transfering these
>gems to AIFF?

------------------------------

Date: Mon, 04 Oct 1999 13:53:53 +0000
From: Bob Hansmann <bobbyb@cloud9.net>
Subject: MacGZip problem

Many thanks for all the responses to me regarding my problem opening up
MacGZip compressed files. The suggestion which seemed to be the only
solution was to open them in BBEdit Lite. Once I get them all opened,
MacGzip will be history for me!
	best wishes to all,
	Bob

------------------------------

Date: Mon, 04 Oct 1999 15:21:27 -0400
From: David <dhuston@drfast.net>
Subject: Making Karaoke file from CD

I teach at a school where we are often producing musical parodies of the
school using contemporary songs, show tunes--along with some older stuff.

I would be a big hero around here if I could find a way to rip a track
off a CD and edit the sound file to remove the sung lyrics and use the
resulting file as accompaniement to our new lyrics.

Is there some simple/easy/cheap way to do this?

Remember, I am NOT a sound geek!

Thanks

David Huston
dhuston@drfast.net
Laurel School
Cleveland, OH

------------------------------

Date: 4 Oct 99 22:10:37 -0400
From: "D. Scott Beach" <sbeach@spamless.tht.net>
Subject: Print Spooling Errors on B&W G3

mreddy@glam.ac.uk (Mike Reddy) asks:
>I keep getting errors when trying to print from an application. During the
>spooling phase, an "Unknown Error" message appears, followed by the app
>crashing (e.g. Word 98). I reinstall the OS, and the Laser 8.6.1 drivers
>and occasionally this clears things up for a couple of print jobs, then
>things go do-lally again. I am printing to a LaserWriter on another Mac,
>and to several PC networked printers, using DAVE. The problem, once it
>appears, occurs for all the printers. Any ideas?

Mike:
Assuming that this is happening in any application (not just microsnot
word) Try turning off the desktop printing extensions and revert to the old
Print Monitor. If that works then you've narrowed it down. Maybe try
trashing prefs <HD:System Folder:Preferences:Printing Prefs:LaserWriter 8
Prefs>. Perhaps try using a different version of LW driver. Either an
earlier LW8 or even LW 7.1.2 or 7.2.
Good luck!
- Scott

Remove the "spamless" to return eMail to me.
Scott Beach <http://www.front.net/sbeach/> Toronto, Canada

------------------------------

Date: Mon, 04 Oct 1999 12:24:53 -0700
From: Bruce Johnson <johnson@pharmacy.arizona.edu>
Subject: sound

> Subject: sound
> Date: Sat, 2 Oct 1999 22:01:53 +1000
> From: Jkars <jkars@ozemail.com.au>
> 
> Hi to all the readers,
> 
> After having collected and read all 342 Mac Digest numbers, I actally have
> a Query myself.
> 
> I am in the process of converting all my reel to reel music, collected over
> the last 50 years, into MP3 format ready to burn onto CD's for safe
> keeping. However I seem to have collected an awful amount of noise in the
> process when I play it back in MP3 format.
>  With what program can I delete the rumbles and noises and clicks and how
> do I do it on my "beige"G3.
> Also how do I convert my MP3 file back to AIFF for editing?
> 

There's a product called Ray Gun, by Arboretum systems
http://www.arboretum.com/

It cleans that stuff up specifically.

BUT!!!

Convert to AIFF first. MP3 is a lossy format, AIFF is not. If you have
enough patience (and CDs) I'd archive the AIFF's to CD, you can edit,
clean up and compress down to MP3 from there. 

Going Tape - MP3 - AIFF - MP3 again is analogous to Tape - 8-Track - DAT
- Cassette ...lts of generational loss even though there's a good format
in the middle.

-- 
Bruce Johnson
University of Arizona
College of Pharmacy
Information Technology Group

------------------------------

Date: Mon, 4 Oct 1999 16:14:12 EDT
From: Luskin@aol.com
Subject: sumex submissions

Does this imply that the submissions to sumex will not come to us as email 
any more, that we will have to go and see what is new there?

mbl

--------------------------------

--Info-Mac-Digest--

End of Info-Mac Digest
******************************