*DECK DBESJ
      SUBROUTINE DBESJ (X, ALPHA, N, Y, NZ)
C***BEGIN PROLOGUE  DBESJ
C***PURPOSE  Compute an N member sequence of J Bessel functions
C            J/SUB(ALPHA+K-1)/(X), K=1,...,N for non-negative ALPHA
C            and X.
C***LIBRARY   SLATEC
C***CATEGORY  C10A3
C***TYPE      DOUBLE PRECISION (BESJ-S, DBESJ-D)
C***KEYWORDS  J BESSEL FUNCTION, SPECIAL FUNCTIONS
C***AUTHOR  Amos, D. E., (SNLA)
C           Daniel, S. L., (SNLA)
C           Weston, M. K., (SNLA)
C***DESCRIPTION
C
C     Abstract  **** a double precision routine ****
C         DBESJ computes an N member sequence of J Bessel functions
C         J/sub(ALPHA+K-1)/(X), K=1,...,N for non-negative ALPHA and X.
C         A combination of the power series, the asymptotic expansion
C         for X to infinity and the uniform asymptotic expansion for
C         NU to infinity are applied over subdivisions of the (NU,X)
C         plane.  For values of (NU,X) not covered by one of these
C         formulae, the order is incremented or decremented by integer
C         values into a region where one of the formulae apply. Backward
C         recursion is applied to reduce orders by integer values except
C         where the entire sequence lies in the oscillatory region.  In
C         this case forward recursion is stable and values from the
C         asymptotic expansion for X to infinity start the recursion
C         when it is efficient to do so. Leading terms of the series and
C         uniform expansion are tested for underflow.  If a sequence is
C         requested and the last member would underflow, the result is
C         set to zero and the next lower order tried, etc., until a
C         member comes on scale or all members are set to zero.
C         Overflow cannot occur.
C
C         The maximum number of significant digits obtainable
C         is the smaller of 14 and the number of digits carried in
C         double precision arithmetic.
C
C     Description of Arguments
C
C         Input      X,ALPHA are double precision
C           X      - X .GE. 0.0D0
C           ALPHA  - order of first member of the sequence,
C                    ALPHA .GE. 0.0D0
C           N      - number of members in the sequence, N .GE. 1
C
C         Output     Y is double precision
C           Y      - a vector whose first N components contain
C                    values for J/sub(ALPHA+K-1)/(X), K=1,...,N
C           NZ     - number of components of Y set to zero due to
C                    underflow,
C                    NZ=0   , normal return, computation completed
C                    NZ .NE. 0, last NZ components of Y set to zero,
C                             Y(K)=0.0D0, K=N-NZ+1,...,N.
C
C     Error Conditions
C         Improper input arguments - a fatal error
C         Underflow  - a non-fatal error (NZ .NE. 0)
C
C***REFERENCES  D. E. Amos, S. L. Daniel and M. K. Weston, CDC 6600
C                 subroutines IBESS and JBESS for Bessel functions
C                 I(NU,X) and J(NU,X), X .GE. 0, NU .GE. 0, ACM
C                 Transactions on Mathematical Software 3, (1977),
C                 pp. 76-92.
C               F. W. J. Olver, Tables of Bessel Functions of Moderate
C                 or Large Orders, NPL Mathematical Tables 6, Her
C                 Majesty's Stationery Office, London, 1962.
C***ROUTINES CALLED  D1MACH, DASYJY, DJAIRY, DLNGAM, I1MACH, XERMSG
C***REVISION HISTORY  (YYMMDD)
C   750101  DATE WRITTEN
C   890531  Changed all specific intrinsics to generic.  (WRB)
C   890911  Removed unnecessary intrinsics.  (WRB)
C   890911  REVISION DATE from Version 3.2
C   891214  Prologue converted to Version 4.0 format.  (BAB)
C   900315  CALLs to XERROR changed to CALLs to XERMSG.  (THJ)
C   900326  Removed duplicate information from DESCRIPTION section.
C           (WRB)
C   920501  Reformatted the REFERENCES section.  (WRB)
C***END PROLOGUE  DBESJ
      EXTERNAL DJAIRY
      INTEGER I,IALP,IDALP,IFLW,IN,INLIM,IS,I1,I2,K,KK,KM,KT,N,NN,
     1        NS,NZ
      INTEGER I1MACH
      DOUBLE PRECISION AK,AKM,ALPHA,ANS,AP,ARG,COEF,DALPHA,DFN,DTM,
     1           EARG,ELIM1,ETX,FIDAL,FLGJY,FN,FNF,FNI,FNP1,FNU,
     2           FNULIM,GLN,PDF,PIDT,PP,RDEN,RELB,RTTP,RTWO,RTX,RZDEN,
     3           S,SA,SB,SXO2,S1,S2,T,TA,TAU,TB,TEMP,TFN,TM,TOL,
     4           TOLLN,TRX,TX,T1,T2,WK,X,XO2,XO2L,Y,SLIM,RTOL
      SAVE RTWO, PDF, RTTP, PIDT, PP, INLIM, FNULIM
      DOUBLE PRECISION D1MACH, DLNGAM
      DIMENSION Y(*), TEMP(3), FNULIM(2), PP(4), WK(7)
      DATA RTWO,PDF,RTTP,PIDT                    / 1.34839972492648D+00,
     1 7.85398163397448D-01, 7.97884560802865D-01, 1.57079632679490D+00/
      DATA  PP(1),  PP(2),  PP(3),  PP(4)        / 8.72909153935547D+00,
     1 2.65693932265030D-01, 1.24578576865586D-01, 7.70133747430388D-04/
      DATA INLIM           /      150            /
      DATA FNULIM(1), FNULIM(2) /      100.0D0,     60.0D0     /
C***FIRST EXECUTABLE STATEMENT  DBESJ
      NZ = 0
      KT = 1
      NS=0
C     I1MACH(14) REPLACES I1MACH(11) IN A DOUBLE PRECISION CODE
C     I1MACH(15) REPLACES I1MACH(12) IN A DOUBLE PRECISION CODE
      TA = D1MACH(3)
      TOL = MAX(TA,1.0D-15)
      I1 = I1MACH(14) + 1
      I2 = I1MACH(15)
      TB = D1MACH(5)
      ELIM1 = -2.303D0*(I2*TB+3.0D0)
      RTOL=1.0D0/TOL
      SLIM=D1MACH(1)*RTOL*1.0D+3
C     TOLLN = -LN(TOL)
      TOLLN = 2.303D0*TB*I1
      TOLLN = MIN(TOLLN,34.5388D0)
      IF (N-1) 720, 10, 20
   10 KT = 2
   20 NN = N
      IF (X) 730, 30, 80
   30 IF (ALPHA) 710, 40, 50
   40 Y(1) = 1.0D0
      IF (N.EQ.1) RETURN
      I1 = 2
      GO TO 60
   50 I1 = 1
   60 DO 70 I=I1,N
        Y(I) = 0.0D0
   70 CONTINUE
      RETURN
   80 CONTINUE
      IF (ALPHA.LT.0.0D0) GO TO 710
C
      IALP = INT(ALPHA)
      FNI = IALP + N - 1
      FNF = ALPHA - IALP
      DFN = FNI + FNF
      FNU = DFN
      XO2 = X*0.5D0
      SXO2 = XO2*XO2
C
C     DECISION TREE FOR REGION WHERE SERIES, ASYMPTOTIC EXPANSION FOR X
C     TO INFINITY AND ASYMPTOTIC EXPANSION FOR NU TO INFINITY ARE
C     APPLIED.
C
      IF (SXO2.LE.(FNU+1.0D0)) GO TO 90
      TA = MAX(20.0D0,FNU)
      IF (X.GT.TA) GO TO 120
      IF (X.GT.12.0D0) GO TO 110
      XO2L = LOG(XO2)
      NS = INT(SXO2-FNU) + 1
      GO TO 100
   90 FN = FNU
      FNP1 = FN + 1.0D0
      XO2L = LOG(XO2)
      IS = KT
      IF (X.LE.0.50D0) GO TO 330
      NS = 0
  100 FNI = FNI + NS
      DFN = FNI + FNF
      FN = DFN
      FNP1 = FN + 1.0D0
      IS = KT
      IF (N-1+NS.GT.0) IS = 3
      GO TO 330
  110 ANS = MAX(36.0D0-FNU,0.0D0)
      NS = INT(ANS)
      FNI = FNI + NS
      DFN = FNI + FNF
      FN = DFN
      IS = KT
      IF (N-1+NS.GT.0) IS = 3
      GO TO 130
  120 CONTINUE
      RTX = SQRT(X)
      TAU = RTWO*RTX
      TA = TAU + FNULIM(KT)
      IF (FNU.LE.TA) GO TO 480
      FN = FNU
      IS = KT
C
C     UNIFORM ASYMPTOTIC EXPANSION FOR NU TO INFINITY
C
  130 CONTINUE
      I1 = ABS(3-IS)
      I1 = MAX(I1,1)
      FLGJY = 1.0D0
      CALL DASYJY(DJAIRY,X,FN,FLGJY,I1,TEMP(IS),WK,IFLW)
      IF(IFLW.NE.0) GO TO 380
      GO TO (320, 450, 620), IS
  310 TEMP(1) = TEMP(3)
      KT = 1
  320 IS = 2
      FNI = FNI - 1.0D0
      DFN = FNI + FNF
      FN = DFN
      IF(I1.EQ.2) GO TO 450
      GO TO 130
C
C     SERIES FOR (X/2)**2.LE.NU+1
C
  330 CONTINUE
      GLN = DLNGAM(FNP1)
      ARG = FN*XO2L - GLN
      IF (ARG.LT.(-ELIM1)) GO TO 400
      EARG = EXP(ARG)
  340 CONTINUE
      S = 1.0D0
      IF (X.LT.TOL) GO TO 360
      AK = 3.0D0
      T2 = 1.0D0
      T = 1.0D0
      S1 = FN
      DO 350 K=1,17
        S2 = T2 + S1
        T = -T*SXO2/S2
        S = S + T
        IF (ABS(T).LT.TOL) GO TO 360
        T2 = T2 + AK
        AK = AK + 2.0D0
        S1 = S1 + FN
  350 CONTINUE
  360 CONTINUE
      TEMP(IS) = S*EARG
      GO TO (370, 450, 610), IS
  370 EARG = EARG*FN/XO2
      FNI = FNI - 1.0D0
      DFN = FNI + FNF
      FN = DFN
      IS = 2
      GO TO 340
C
C     SET UNDERFLOW VALUE AND UPDATE PARAMETERS
C     UNDERFLOW CAN ONLY OCCUR FOR NS=0 SINCE THE ORDER MUST BE LARGER
C     THAN 36. THEREFORE, NS NEE NOT BE TESTED.
C
  380 Y(NN) = 0.0D0
      NN = NN - 1
      FNI = FNI - 1.0D0
      DFN = FNI + FNF
      FN = DFN
      IF (NN-1) 440, 390, 130
  390 KT = 2
      IS = 2
      GO TO 130
  400 Y(NN) = 0.0D0
      NN = NN - 1
      FNP1 = FN
      FNI = FNI - 1.0D0
      DFN = FNI + FNF
      FN = DFN
      IF (NN-1) 440, 410, 420
  410 KT = 2
      IS = 2
  420 IF (SXO2.LE.FNP1) GO TO 430
      GO TO 130
  430 ARG = ARG - XO2L + LOG(FNP1)
      IF (ARG.LT.(-ELIM1)) GO TO 400
      GO TO 330
  440 NZ = N - NN
      RETURN
C
C     BACKWARD RECURSION SECTION
C
  450 CONTINUE
      IF(NS.NE.0) GO TO 451
      NZ = N - NN
      IF (KT.EQ.2) GO TO 470
C     BACKWARD RECUR FROM INDEX ALPHA+NN-1 TO ALPHA
      Y(NN) = TEMP(1)
      Y(NN-1) = TEMP(2)
      IF (NN.EQ.2) RETURN
  451 CONTINUE
      TRX = 2.0D0/X
      DTM = FNI
      TM = (DTM+FNF)*TRX
      AK=1.0D0
      TA=TEMP(1)
      TB=TEMP(2)
      IF(ABS(TA).GT.SLIM) GO TO 455
      TA=TA*RTOL
      TB=TB*RTOL
      AK=TOL
  455 CONTINUE
      KK=2
      IN=NS-1
      IF(IN.EQ.0) GO TO 690
      IF(NS.NE.0) GO TO 670
      K=NN-2
      DO 460 I=3,NN
        S=TB
        TB = TM*TB - TA
        TA=S
        Y(K)=TB*AK
        DTM = DTM - 1.0D0
        TM = (DTM+FNF)*TRX
        K = K - 1
  460 CONTINUE
      RETURN
  470 Y(1) = TEMP(2)
      RETURN
C
C     ASYMPTOTIC EXPANSION FOR X TO INFINITY WITH FORWARD RECURSION IN
C     OSCILLATORY REGION X.GT.MAX(20, NU), PROVIDED THE LAST MEMBER
C     OF THE SEQUENCE IS ALSO IN THE REGION.
C
  480 CONTINUE
      IN = INT(ALPHA-TAU+2.0D0)
      IF (IN.LE.0) GO TO 490
      IDALP = IALP - IN - 1
      KT = 1
      GO TO 500
  490 CONTINUE
      IDALP = IALP
      IN = 0
  500 IS = KT
      FIDAL = IDALP
      DALPHA = FIDAL + FNF
      ARG = X - PIDT*DALPHA - PDF
      SA = SIN(ARG)
      SB = COS(ARG)
      COEF = RTTP/RTX
      ETX = 8.0D0*X
  510 CONTINUE
      DTM = FIDAL + FIDAL
      DTM = DTM*DTM
      TM = 0.0D0
      IF (FIDAL.EQ.0.0D0 .AND. ABS(FNF).LT.TOL) GO TO 520
      TM = 4.0D0*FNF*(FIDAL+FIDAL+FNF)
  520 CONTINUE
      TRX = DTM - 1.0D0
      T2 = (TRX+TM)/ETX
      S2 = T2
      RELB = TOL*ABS(T2)
      T1 = ETX
      S1 = 1.0D0
      FN = 1.0D0
      AK = 8.0D0
      DO 530 K=1,13
        T1 = T1 + ETX
        FN = FN + AK
        TRX = DTM - FN
        AP = TRX + TM
        T2 = -T2*AP/T1
        S1 = S1 + T2
        T1 = T1 + ETX
        AK = AK + 8.0D0
        FN = FN + AK
        TRX = DTM - FN
        AP = TRX + TM
        T2 = T2*AP/T1
        S2 = S2 + T2
        IF (ABS(T2).LE.RELB) GO TO 540
        AK = AK + 8.0D0
  530 CONTINUE
  540 TEMP(IS) = COEF*(S1*SB-S2*SA)
      IF(IS.EQ.2) GO TO 560
      FIDAL = FIDAL + 1.0D0
      DALPHA = FIDAL + FNF
      IS = 2
      TB = SA
      SA = -SB
      SB = TB
      GO TO 510
C
C     FORWARD RECURSION SECTION
C
  560 IF (KT.EQ.2) GO TO 470
      S1 = TEMP(1)
      S2 = TEMP(2)
      TX = 2.0D0/X
      TM = DALPHA*TX
      IF (IN.EQ.0) GO TO 580
C
C     FORWARD RECUR TO INDEX ALPHA
C
      DO 570 I=1,IN
        S = S2
        S2 = TM*S2 - S1
        TM = TM + TX
        S1 = S
  570 CONTINUE
      IF (NN.EQ.1) GO TO 600
      S = S2
      S2 = TM*S2 - S1
      TM = TM + TX
      S1 = S
  580 CONTINUE
C
C     FORWARD RECUR FROM INDEX ALPHA TO ALPHA+N-1
C
      Y(1) = S1
      Y(2) = S2
      IF (NN.EQ.2) RETURN
      DO 590 I=3,NN
        Y(I) = TM*Y(I-1) - Y(I-2)
        TM = TM + TX
  590 CONTINUE
      RETURN
  600 Y(1) = S2
      RETURN
C
C     BACKWARD RECURSION WITH NORMALIZATION BY
C     ASYMPTOTIC EXPANSION FOR NU TO INFINITY OR POWER SERIES.
C
  610 CONTINUE
C     COMPUTATION OF LAST ORDER FOR SERIES NORMALIZATION
      AKM = MAX(3.0D0-FN,0.0D0)
      KM = INT(AKM)
      TFN = FN + KM
      TA = (GLN+TFN-0.9189385332D0-0.0833333333D0/TFN)/(TFN+0.5D0)
      TA = XO2L - TA
      TB = -(1.0D0-1.5D0/TFN)/TFN
      AKM = TOLLN/(-TA+SQRT(TA*TA-TOLLN*TB)) + 1.5D0
      IN = KM + INT(AKM)
      GO TO 660
  620 CONTINUE
C     COMPUTATION OF LAST ORDER FOR ASYMPTOTIC EXPANSION NORMALIZATION
      GLN = WK(3) + WK(2)
      IF (WK(6).GT.30.0D0) GO TO 640
      RDEN = (PP(4)*WK(6)+PP(3))*WK(6) + 1.0D0
      RZDEN = PP(1) + PP(2)*WK(6)
      TA = RZDEN/RDEN
      IF (WK(1).LT.0.10D0) GO TO 630
      TB = GLN/WK(5)
      GO TO 650
  630 TB=(1.259921049D0+(0.1679894730D0+0.0887944358D0*WK(1))*WK(1))
     1 /WK(7)
      GO TO 650
  640 CONTINUE
      TA = 0.5D0*TOLLN/WK(4)
      TA=((0.0493827160D0*TA-0.1111111111D0)*TA+0.6666666667D0)*TA*WK(6)
      IF (WK(1).LT.0.10D0) GO TO 630
      TB = GLN/WK(5)
  650 IN = INT(TA/TB+1.5D0)
      IF (IN.GT.INLIM) GO TO 310
  660 CONTINUE
      DTM = FNI + IN
      TRX = 2.0D0/X
      TM = (DTM+FNF)*TRX
      TA = 0.0D0
      TB = TOL
      KK = 1
      AK=1.0D0
  670 CONTINUE
C
C     BACKWARD RECUR UNINDEXED
C
      DO 680 I=1,IN
        S = TB
        TB = TM*TB - TA
        TA = S
        DTM = DTM - 1.0D0
        TM = (DTM+FNF)*TRX
  680 CONTINUE
C     NORMALIZATION
      IF (KK.NE.1) GO TO 690
      S=TEMP(3)
      SA=TA/TB
      TA=S
      TB=S
      IF(ABS(S).GT.SLIM) GO TO 685
      TA=TA*RTOL
      TB=TB*RTOL
      AK=TOL
  685 CONTINUE
      TA=TA*SA
      KK = 2
      IN = NS
      IF (NS.NE.0) GO TO 670
  690 Y(NN) = TB*AK
      NZ = N - NN
      IF (NN.EQ.1) RETURN
      K = NN - 1
      S=TB
      TB = TM*TB - TA
      TA=S
      Y(K)=TB*AK
      IF (NN.EQ.2) RETURN
      DTM = DTM - 1.0D0
      TM = (DTM+FNF)*TRX
      K=NN-2
C
C     BACKWARD RECUR INDEXED
C
      DO 700 I=3,NN
        S=TB
        TB = TM*TB - TA
        TA=S
        Y(K)=TB*AK
        DTM = DTM - 1.0D0
        TM = (DTM+FNF)*TRX
        K = K - 1
  700 CONTINUE
      RETURN
C
C
C
  710 CONTINUE
      CALL XERMSG ('SLATEC', 'DBESJ', 'ORDER, ALPHA, LESS THAN ZERO.',
     +   2, 1)
      RETURN
  720 CONTINUE
      CALL XERMSG ('SLATEC', 'DBESJ', 'N LESS THAN ONE.', 2, 1)
      RETURN
  730 CONTINUE
      CALL XERMSG ('SLATEC', 'DBESJ', 'X LESS THAN ZERO.', 2, 1)
      RETURN
      END