Packages changed:
  gnu_ddrescue (1.20 -> 1.21)
  mpfr (3.1.3 -> 3.1.4)
  ncurses
  nmap (7.01 -> 7.10)
  pkg-config (0.29 -> 0.29.1)
  sshfs (2.5 -> 2.7)

=== Details ===

==== gnu_ddrescue ====
Version update (1.20 -> 1.21)

- Update to 1.21
  * A bug in the alignment of the I/O buffer has been (hopefully)
    fixed.
  * Ddrescue now exits with status 1 in case of unaligned read in
    direct mode (because of a wrong sector size, for example).
  * Short option names '-1' and '-2' have been removed to avoid
    mistakes in the command line.
  * Only regular files are now allowed as arguments of options
    '--log-rates' and '--log-reads'.
  * Option '-D, --odirect' now works also in fill mode.
  * Option '-J, --verify-on-error' now marks blocks as failed on
    any error, and exits with status 1 if a read error happens
    before a good sector is found.
  * Option '-X, --exit-on-error' has been extended to all phases.
  * The short name '-Z' has been assigned to option
    '--max-read-rate'.
  * The mapfile is now "fsync'ed" every 5 minutes because some
    systems seem to never write the mapfile to disc.
  * Ddrescue now shows all sizes in rescue mode; non-tried,
    non-trimmed, non-scraped, bad-sector and finished.
  * Ddrescue now shows the percentage of the domain rescued in
    rescue mode.

==== mpfr ====
Version update (3.1.3 -> 3.1.4)
Subpackages: libmpfr4 mpfr-devel

- mpfr 3.1.4, incorporating the cumulative patch, plus a number of
  upstream fixes
- removing mpfr-3.1.3-patch1to12.patch

==== ncurses ====
Subpackages: libncurses5 libncurses6 libncurses6-32bit ncurses-devel ncurses-utils tack terminfo terminfo-base

- Add ncurses patch 20160220
  + modify test/configure script to check for pthread dependency of
    ncursest or ncursestw library when building ncurses examples, e.g.,
    in case weak symbols are used.
  + modify configure macro for shared-library rules to use -Wl,-rpath
    rather than -rpath to work around a bug in scons (FreeBSD #178732,
    cf: 20061021).
  + double-width multibyte characters were not counted properly in
    winsnstr and wins_nwstr (report/example by Eric Pruitt).
  + update config.guess, config.sub from
    http://git.savannah.gnu.org/cgit/config.git

==== nmap ====
Version update (7.01 -> 7.10)

- Nmap 7.10:
  * Add 12 NSE scripts
  * Integrate OS, service/version detection fingerprint submissions
  * Updated to various NSE scripts
  * Zenmap: Remember window geometry (position and size) from the
    previous time Zenmap was run.
  * Give option parsing errors after the long usage statement
  * Changed Nmap's idea of reserved and private IP addresses to include
    169.254/16 (RFC3927) and remove 6/8, 7/8, and 55/8 networks
    (for -iR randomly generated targets)
    Usage of own exclusion lists with --exclude or --exclude-file is
    recommended to avoid scanning newly-valid addresses belonging to
    the US DoD.
  * Allow the -4 option for Nmap to indicate IPv4 address family.
  * Add verbosity level of 0 (-v0): not text output

==== pkg-config ====
Version update (0.29 -> 0.29.1)

- Update to version 0.29.1:
  + Fixed a regression from 0.29 with unquoting values queried with
  - -variable. In some cases, this would cause shell special
    characters to be escaped in ways they weren't before. Instead,
    the unquoting only occurs if the value appears to be quoted
    (fdo#93284).
  + Add support for building pkg-config with Microsoft Visual
    Studio (fdo#92489).
  + Allow overriding pkg-config variables with environment
    variables. By setting an environment variable of the form
    PKG_CONFIG_$PACKAGE_$VARIABLE, a pkg-config variable can be set
    globally without always having to pass --define-variable
    (fdo#90917).
  + Honor -Wl,-framework in addition to -framework so that multiple
    frameworks are handled on OSX (fdo#1278).
  + Fix the OSX build using --with-internal-glib (fdo#92902).

==== sshfs ====
Version update (2.5 -> 2.7)

- update to 2.7
- spec-cleaned spec file
  * Added -o cache_max_size=N option to let users tune the maximum size of the cache
  in number of entries.
  * Added -o cache_clean_interval=N and -o cache_min_clean_interval=N options to
  let users tune the cleaning behavior of the cache.
- update to 2.5
  * Add -o disable_hardlink option (debian bug #670926).
  * Optimize readdir by sending multiple requests in parallel.  Add -o
    sync_readdir to restore old behavior.
  * Map SSH2_FX_FAILURE to ENOTEMPTY for rmdir.
  * When checking root directory use LSTAT not STAT.  This prevents I/O error
    being returned after a successful mount if a symlink is mounted.
- Remove redundant tags/sections from specfile
- Parallel build with %_smp_mflags
- update to 2.4
  * Add "-oworkaround=fstat" for SFTP servers which don't support
    the FSTAT message.  Patch by: Percy Jahn
  * Remove "-oPreferredAuthentications" from ssh options if the
    "password_stdin" option is used.  Reported by E. Kuemmerle
  * Fix double free if reconnection races with request sending.
    Patch by E. Kuemmerle
  * Submit max 32k reads and writes to the sftp server.  Also don't
    limit the kernel to 64k reads and writes, rather split into 32k
    sized chunks and send them to the server all at once.  This is
    more efficient and less demanding from the server.  Reported by
    Ludovic Courtès.  Fix suggested by Niels Möller
  * Make chown respect the UID mapping policy.  Reported and tested
    by Vivenzio Pagliari
  * Add -o idmap=file, -o uidmap=FILE, -o gidmap=FILE. These options
    allow you to create a pair of local files, similar to /etc/passwd or
    /etc/group files from the remote server, and use those to remap all
    the given UIDs/GIDs.
  * Add -o slave. This option routes the sftp communication over stdin
    and stdout, bypassing SSH and network.
  * Make sure idmap files aren't writable by others otherwise, other
    local users could change the mapping, and gain access to things
    they shouldn't.  Patch by Mike Kelly
- add automake as buildrequire to avoid implicit dependency
- updated to 2.3
  * Add hard link operation
  * Fix possible deadlock on reconnection
  * Fix cleanup when ssh connection is terminated to prevent
    sshfs hanging when the server is rebooted, for example
  * Set FD_CLOEXEC on fuse device to prevent deadlocks
  * Check mountpoint and fuse options before starting an ssh
    session
  * Allow mounting a single non-directory from the server
  * Add option 'delay_connect'
  * Print usage information and version to stdout, not stderr
- licenses package is about to die
- updated to version 2.2
  * Handle numerical IPv6 addresses enclosed in square brackets.
  * Fix error if username contains a comma character
- updated to version 2.1
  * Support password authentication with pam_mount
  * Support atomic renames if server is OpenSSH 4.9 or later
  * Support getting disk usage if server is OpenSSH 5.1 or later
  * Add man page
  * Improved ssh option support
  * Improved support for specifying a special ssh command
  * Fix bug that could cause corruption with append mode writes
  * Allow specifying an ssh config file
- updated to version 1.9
  * Fix crash when writing large files on SMP
  * Fill in st_ctime attribute
  * Add mount subtype support
  * Small optimizations