Packages changed:
  aaa_base (84.87+git20200918.331aa2f -> 84.87+git20201123.4f16b16)
  bcache-tools
  cni-plugins (0.8.7 -> 0.9.0)
  colord (1.4.4 -> 1.4.5)
  dhcp
  flatpak (1.8.3 -> 1.8.4)
  gnome-control-center (3.38.2 -> 3.38.3)
  libgusb
  libslirp (4.3.1 -> 4.4.0)
  pulseaudio
  qpdf (10.0.4 -> 10.1.0)
  slirp4netns (1.0.0 -> 1.1.8)
  xdg-desktop-portal (1.6.0 -> 1.8.0)
  xdg-desktop-portal-gtk (1.6.0 -> 1.8.0)

=== Details ===

==== aaa_base ====
Version update (84.87+git20200918.331aa2f -> 84.87+git20201123.4f16b16)

- clean up rpmlintrc. Add filter for deprecated init scripts. We'll have to
  keep them around for a while until systemd takes over ownership.
- Update to version 84.87+git20201123.4f16b16:
  * mark /etc/init.d/{boot,after}.local as %config(noreplace) (boo#1179097)
  * Avoid semicolon within (t)csh login script on S/390
- prepare usrmerge (boo#1029961)

==== bcache-tools ====

- bcache.h: fix typo from SUUP to SUPP (jsc#SLE-9807)
  0019-bcache.h-fix-typo-from-SUUP-to-SUPP.patch
- bcache-tools: only call set_bucket_size() for cache device
  (jsc#SLE-9807)
  0020-bcache-tools-only-call-set_bucket_size-for-cache-dev.patch
- bcache.h: add BCH_FEATURE_INCOMPAT_LARGE_BUCKET to
  BCH_FEATURE_INCOMPAT_SUPP (jsc#SLE-9807)
  0021-bcache.h-add-BCH_FEATURE_INCOMPAT_LARGE_BUCKET-to-BC.patch
- bcache-tools: check incompatible feature set (jsc#SLE-9807)
  0022-bcache-tools-check-incompatible-feature-set.patch
- bcache-tools: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE
  for large bucket (jsc#SLE-9807)
  0023-bcache-tools-introduce-BCH_FEATURE_INCOMPAT_LOG_LARG.patch
- bcache-tools: display obsoleted bucket size configuration
  (jsc#SLE-9807)
  0024-bcache-tools-display-obsoleted-bucket-size-configura.patch
- bcache-tools: recover the missing sb.csum for showing bcache device
  super block (jsc#SLE-9807)
  0025-bcache-tools-recover-the-missing-sb.csum-for-showing.patch
- bcache-tools: only call to_cache_sb() for bcache device
  in may_add_item() (jsc#SLE-9807)
  0026-bcache-tools-only-call-to_cache_sb-for-bcache-device.patch
- bcache-tools: improve column alignment for "bcache show
  - m" output (jsc#SLE-9807)
  0027-bcache-tools-improve-column-alignment-for-bcache-sho.patch

==== cni-plugins ====
Version update (0.8.7 -> 0.9.0)

- Update to version 0.9.0:
  * tuning: revert values on delete (#540)
  * go mod tidy
  * bump to go 1.15
  * Add ability to trigger retests via comments
  * pkg/ns: fix test case to tolerate pids going away.
  * Add github build & test actions
  * bridge: fix testcase to check addresses we care about
  * Remove travis.
  * vendor: bump ginkgo, gover
  * portmap plugin should flush previous udp connections
  * Updating plugin README.md files (#549)
  * update netlink dependencies
  * Xdhcp: fix example configuration
  * VRF: extend supported version to 0.3.1 too.
  * VRF CNI: Add an optional table parameter.
  * Add more tests for the vrf cni plugin.
  * Update github.com/vishvananda/netlink to v1.1.0
  * Introduce a new VRF CNI meta plugin.
  * Travis: run tests on arm64
  * Replace nc with the local echo client.
  * Add an echo client to be used instead of nc.
  * Bump up the ubuntu version used in CI to bionic.
  * flannel: allow input ipam parameters as basis for delegate
  * ipvlan: make master config as optional
  * Remove extraneous test file in Windows plugin

==== colord ====
Version update (1.4.4 -> 1.4.5)

- Update to version 1.4.5:
  + New Features:
  - Add cd_icc_create_default_full
  - Add cd_icc_utils_get_adaptation_matrix
  - Add cd_mat33_is_finite
  - Add support for datacolor SpyderX
  + Bugfixes:
  - Check for errors from more sqlite calls
  - Fix cd_icc_load_data() annotation for the data array
  - Fix cd-sensor-dummy
  - Fix more annotation for data arrays
  - Fix owner and permissions on existing state files
  - Fix segfault due to dereferencing NULL pointer
  - Make the build reproductible
  - Refactor opening of mapping database and try again if fails
- Drop add-spyderx.patch: Included upstream in new release.

==== dhcp ====
Subpackages: dhcp-client

- prepare usrmerge (boo#1029961)

==== flatpak ====
Version update (1.8.3 -> 1.8.4)
Subpackages: libflatpak0 system-user-flatpak

- Update to version 1.8.4:
  + Fix support for ppc64.

==== gnome-control-center ====
Version update (3.38.2 -> 3.38.3)
Subpackages: gnome-control-center-goa

- Update to version 3.38.3:
  + Display: Fix crash when unable to get display configuration.
  + Network: Fix smal leak getting WiFi secrets.
  + Printers: Fix small leaks in new printer dialog.
  + User Accounts: Fix crash showing error in fingerprint dialog.
  + Updated translations.

==== libgusb ====

- Add baselibs.conf: build libgusb2-32bit, which is a dependency to
  libfprint-2-2-32bit. Due to a installcheck bot issue, this
  happened to be undetected for a while though.

==== libslirp ====
Version update (4.3.1 -> 4.4.0)

- Update to version 4.4.0:
  * Release v4.4.0
  * socket: consume empty packets
  * slirp: check pkt_len before reading protocol header
  * Remove the QEMU-special make build-system
  * Add DNS resolving for iOS
  * meson: support compiling as subproject
  * meson: remove meson-dist script
  * Add G_GNUC_PRINTF to local function slirp_vsnprintf
  * sosendoob: better document what urgc is used for
  * .gitlab-ci: add a Coverity stage
  * TCPIPHDR_DELTA: Fix potential negative value
  * udp, udp6, icmp, icmp6: Enable forwarding errors on Linux
  * icmp, icmp6: Add icmp_forward_error and icmp6_forward_error
  * udp, udp6, icmp: handle TTL value
  * ip_stripoptions use memmove
  * changelog: post-release

==== pulseaudio ====
Subpackages: libpulse-mainloop-glib0 libpulse0 pulseaudio-module-bluetooth pulseaudio-module-gsettings pulseaudio-module-x11 pulseaudio-module-zeroconf pulseaudio-utils

- Fix copyright in the spec file for SLE submission

==== qpdf ====
Version update (10.0.4 -> 10.1.0)

- Update to version 10.1.0
  * See http://qpdf.sourceforge.net/files/qpdf-manual.html#ref.release-notes
    for the complete changelog.

==== slirp4netns ====
Version update (1.0.0 -> 1.1.8)

- Update to version 1.1.8:
  * v1.1.8
  * CI: bump libslirp to v4.4.0
  * tests: Avoid closing pipe grep in cidr test
  * v1.1.7+dev
  * v1.1.7
  * test-slirp4netns-cidr.sh: avoid EPIPE
  * CI: s/test-centos/test-centos7/ for clarity
  * CI: Test with libslirp 4.3.1 on CentOS 7
  * .gitignore: add .vagrant
  * Vagrantfile: change VirtualBox itself's slirp CIDR

==== xdg-desktop-portal ====
Version update (1.6.0 -> 1.8.0)

- Update to version 1.8.0:
  + openuri:
  - Allow skipping the chooser for more URL tyles
  - Robustness fixes
  + filechooser: Return the current filter
  + camera:
  - Make the client node visible
  - Don't leak pipewire proxy
  + Fix file descriptor leaks
  + Testsuite improvements
  + Updated translations.
- Changes from version 1.7.2:
  + document:
  - Reduce the use of open fds
  - Add more tests and fix issues they found
  + Fix the build with musl.
- Changes from version 1.7.1:
  + filechooser:
  - Add a "directory" option
  - Document the "writable" option
  + document: Expose directories with their proper name
- Changes from version 1.7.0:
  + testsuite improvements
  + background: Avoid a segfault
  + screencast: Require pipewire 0.3
  + document:
  - Support exporting directories
  - New fuse implementation
  + Better support for snap and toolbox
  + Updated translations.
- Drop patches fixed upstream:
  + xdg-dp-port-pipewire-3-api.patch
  + 0001-Fix-use-after-free-in-xdg_get_app_info_from_pid.patch
  + 0002-add-AssumedAppArmorLabel-key-to-D-Bus-service-files.patch
  + 0003-Fix-criticals-if-no-default-handler-for-desired-type.patch

==== xdg-desktop-portal-gtk ====
Version update (1.6.0 -> 1.8.0)

- Update to version 1.8.0:
  + filechooser: Return the current filter
  + screenshot: Fix cancellation
  + appchooser: Avoid a crash
  + wallpaper:
  - Properly preview placement settings
  - Drop the lockscreen option
  + printing: Improve the notification
  + Updated translations.
- Changes from version 1.7.1:
  + filechooser:
  - Handle the "directory" option to select directories
  - Only show preview when we have an image
  + Updated translations.
- Changes from version 1.7.0:
  + screencast: Support mutter version 3
  + settings: Fall back to gsettings for enable-animations
  + Updated translations.
- Drop xdg-dpg-support-mutter-pipewire-3-api.patch: Fixed upstream.