|
|
This class is used to store a routing entry.
Fib2mribRoute (const IPv4Net& network, const IPv4& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route)
| Fib2mribRoute |
Constructor for a given IPv4 route.
Parameters:
network | the network address prefix this route applies to. |
nexthop | the address of the next-hop router for this route. |
ifname | the name of the physical interface toward the destination. |
vifname | the name of the virtual interface toward the destination. |
metric | the routing metric for this route. |
admin_distance | the administratively defined distance for this route. |
protocol_origin | the name of the protocol that originated this route. |
xorp_route | true if this route was installed by XORP. |
Fib2mribRoute (const IPv6Net& network, const IPv6& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route)
| Fib2mribRoute |
Constructor for a given IPv6 route.
Parameters:
network | the network address prefix this route applies to. |
nexthop | the address of the next-hop router for this route. |
ifname | the name of the physical interface toward the destination. |
vifname | the name of the virtual interface toward the destination. |
metric | the routing metric for this route. |
admin_distance | the administratively defined distance for this route. |
protocol_origin | the name of the protocol that originated this route. |
xorp_route | true if this route was installed by XORP. |
bool operator== (const Fib2mribRoute& other)
| operator== |
[const]
Equality Operator
Parameters:
other | the right-hand operand to compare against. |
Returns: true if the left-hand operand is numerically same as the right-hand operand.
bool is_ipv4 ()
| is_ipv4 |
[const]
Test if this is an IPv4 route.
Returns: true if this is an IPv4 route, otherwise false.
bool is_ipv6 ()
| is_ipv6 |
[const]
Test if this is an IPv6 route.
Returns: true if this is an IPv6 route, otherwise false.
const IPvXNet& network ()
| network |
[const]
Get the network address prefix this route applies to.
Returns: the network address prefix this route appies to.
const IPvX& nexthop ()
| nexthop |
[const]
Get the address of the next-hop router for this route.
Returns: the address of the next-hop router for this route.
void set_nexthop (const IPvX& v)
| set_nexthop |
Set the address of the next-hop router for this route.
Parameters:
v | the address of the next-hop router for this route. |
const string& ifname ()
| ifname |
[const]
Get the name of the physical interface toward the destination.
Returns: the name of the physical interface toward the destination.
void set_ifname (const string& v)
| set_ifname |
Set the name of the physical interface toward the destination.
Parameters:
v | the name of the physical interface toward the destination. |
const string& vifname ()
| vifname |
[const]
Get the name of the virtual interface toward the destination.
Returns: the name of the virtual interface toward the destination.
void set_vifname (const string& v)
| set_vifname |
Set the name of the virtual interface toward the destination.
Parameters:
v | the name of the virtual interface toward the destination. |
uint32_t admin_distance ()
| admin_distance |
[const]
Get the the administratively defined distance for this route.
Returns: the administratively defined distance for this route.
uint32_t metric ()
| metric |
[const]
Get the metric distance for this route.
Returns: the metric distance for this route.
const string& protocol_origin ()
| protocol_origin |
[const]
Get the name of the protocol that originated this route.
Returns: the name of the protocol that originated this route.
bool xorp_route ()
| xorp_route |
[const]
Test if this route was installed by XORP.
Returns: true if this route was installed by XORP.
bool is_add_route ()
| is_add_route |
[const]
Test if this is a route to add.
Returns: true if this is a route to add, otherwise false.
bool is_replace_route ()
| is_replace_route |
[const]
Test if this is a replacement route.
Returns: true if this is a replacement route, otherwise false.
bool is_delete_route ()
| is_delete_route |
[const]
Test if this is a route to delete.
Returns: true if this is a route to delete, otherwise false.
void set_add_route ()
| set_add_route |
Set the type of this route to "a route to add".
void set_replace_route ()
| set_replace_route |
Set the type of this route to "a replacement route".
void set_delete_route ()
| set_delete_route |
Set the type of this route to "a route to delete".
bool is_interface_route ()
| is_interface_route |
[const]
Test if the route is interface-specific (e.g., if the interface is explicitly specified).
Returns: true if the route is interface-specific, otherwise false.
bool is_valid_entry (string& error_msg)
| is_valid_entry |
[const]
Check whether the route entry is valid.
Parameters:
error_msg | the error message (if error). |
Returns: true if the route entry is valid, otherwise false.
bool is_ignored ()
| is_ignored |
[const]
Test if the route is to be ignored.
This method is used only for internal purpose when passing the route around.
Returns: true if the route is to be ignored, otherwise false.
void set_ignored (bool v)
| set_ignored |
Set whether the route is to be ignored.
This method is used only for internal purpose when passing the route around.
Parameters:
v | true if the route is to be ignored, otherwise false. |
const PolicyTags& policytags ()
| policytags |
[const]
Returns: policy-tags for this route.
void set_policytags (const PolicyTags& tags)
| set_policytags |
Set policy-tags for route.
Parameters:
tags | the new policy-tags for this route. |
bool is_filtered ()
| is_filtered |
[const]
Returns: whether route has been rejected by policy filter.
void set_filtered (bool v)
| set_filtered |
Sets whether the route is to be considered filtered [rejected by the policy filter].
Parameters:
v | true if the route should be considered rejected. |